
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

mspm0g3507 minimal dev board
G3507-base is an open-source printed circuit board by ntn888, from the ntn888/g3507-base-pcb repository on GitHub. It is a 2-layer board of 22 × 41 mm with 16 parts on 50 nets, routed with 326 tracks and 29 vias.
Its parts include 5 resistors, 4 capacitors, 3 connectors, 2 diodes and 1 IC.
Red LED 0805- C965812
Blue LED 0805- C965817
Resistor 1K 0805 x2- C95781
Resistor 47K 0805- C126351
Resistor 330 0805- C105877
Resistor 100K 0.1% 0805- C122537
Cap 10nF 0805- C1710
Cap 10uF 0805- C15850
Cap 0.1uF 0805- C49678
Cap 0.47uF 0805- C106843
sw_push- C720477
conn01x04 C42431821
conn01x15 C2337
uC- C22362630
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0.47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 100K 0.1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | SW_Push | g3507-base_stuff:SW_SPST_TS-1088-AR02016 | SW1 |
| 1 | mspm0g3507 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 22 × 41 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ntn888/g3507-base-pcb repository on GitHub, at the commit this page was made from: the board is g3507-base.kicad_pcb and its schematic g3507-base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ntn888 before reusing the design.