Skip to the content
2 layers98 × 98.8 mmStarbie, the printed circuit board in 3D

A small KiCad PCB project: a handheld board built around a Seeed XIAO ESP32-C3, with an I2C OLED display (128x64), an MPU6050 motion sensor (GY-521), and push buttons (Cherry MX switches).

Size
98 × 98.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
27
Pads
54
Tracks, vias
33, 8
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Oct 2026
Updated
30 Oct 2026

Overview

Starbie is an open-source printed circuit board by npsboy, from the npsboy/Starbie-PCB-Design repository on GitHub. It is a 2-layer board of 98 × 98.8 mm with 7 parts on 27 nets, routed with 33 tracks and 8 vias.

It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Starbie

A small KiCad PCB project: a handheld board built around a Seeed XIAO ESP32-C3, with an I2C OLED display (128x64), an MPU6050 motion sensor (GY-521), and push buttons (Cherry MX switches).

Starbie PCB design

What is it?

The Starbie is a handheld PCB with an embedded OLED display that acts as a digital pet. You can interact with the digital character using push buttons and using the gyroscope (motion sensor), which can detect tilts, shakes and so on.

What each part does:

  • XIAO ESP32C3: The main brain of the system. This is a small development board, kind of like a regular esp 32 or raspberri-pi pico, not a bare microcontroller processor.
  • OLED: The main screen that displays the charecter/pet.
  • Accelerometer/Gyro: Detects tilts, shakes, etc.
  • Temperature and humidity sensor: Exactly what it says it does. Can be used later to trigger different animations for the pet based on the environmental conditions.
  • Mechanical keyboard switches: These are the two push buttons that help us interact with the pet. These are not the standard push buttons that you usually see, though.
  • MX Keycaps: The keyboard switches do not come with a keycap. You have to buy and attach it yourself, or clicking the buttons won't be very comfortable.

Schematic

Starbie schematic

3D Render

Starbie_3D_render

Bill of Materials

Full BOM with vendor links and notes: Starbie_BOM.csv (prices in USD, vendors in India).

PartRefPurposeQtyUNITVendor
Seeed Studio XIAO ESP32C3U2Microcontroller (Wi-Fi, main loop)115.91Amazon
0.96in 128x64 I2C OLED, 4-pinJ1Shows the pet and the menu11.68Ktron
MPU6050 GY-521 accelerometer/gyroJ2Tilt to steer the menu, shake detection11.99Ktron
DHT11 temperature/humidity sensor, bare 4-pinU1Senses room temperature and humidity10.96Ktron
MX-style mechanical keyboard switchesSW1, SW2The two buttons (menu and stats)1 pack8.28Amazon
Blank MX keycapsSW1, SW2Caps for the two buttons1 pack7.18Amazon
PCB fabrication, 2-layer FR4, 98.04x98.8 mmThe bare Starbie board (Rs 2,166 for 5 boards, about Rs 433 each)1 order (5 boards)22.45LionCircuits

Contents

  • Starbie.kicad_sch / Starbie.kicad_pcb / Starbie.kicad_pro: KiCad project files
  • libs/: custom symbols, footprints and 3D models
  • gerbers/, Starbie_Gerbers.zip: manufacturing outputs
  • Starbie_BOM.csv: bill of materials with vendors and prices (India)
  • Starbie_CPL.csv: component placement list for PCB assembly
  • renders/: top and bottom board renders

Parts

7
QtyValueFootprintReferences
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU1
1MPU6050Starbie_Parts:MPU6050_ModuleJ2
1OLEDStarbie_Parts:Display_128x64_096_I2CJ1
1XIAO-ESP32-C3-SMDStarbie_Parts:XIAO-ESP32-C3-SMDU2

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Starbie PCB?

It measures 98 × 98.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie use?

7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie KiCad files?

From the npsboy/Starbie-PCB-Design repository on GitHub, at the commit this page was made from: the board is Starbie.kicad_pcb and its schematic Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie design in my own project?

Its repository states no licence, so its author keeps all rights: ask npsboy before reusing the design.