Skip to the content
2 layers44 × 36 mmStm32, the printed circuit board in 3D

Hardware and software for a modified follow-along of KiCad 6 STM32 PCB Design Full Tutorial - Phil's Lab #65

Size
44 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
51
Pads
157
Tracks, vias
191, 34
Pours
10
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Sep 2025
Updated
15 Sep 2025

Overview

Stm32 is an open-source printed circuit board by npgo22, from the npgo22/stm32_kicad repository on GitHub. It is a 2-layer board of 44 × 36 mm with 40 parts on 51 nets, routed with 191 tracks and 34 vias.

It is built around the STM32F103C8T6, AMS1117-3.3 and TYPE-C-31-M-12. Its parts include 15 capacitors, 9 resistors, 4 connectors, 2 ICs and 2 switches. It belongs with the STM32 boards of this library.

Main components

3

README

README

Hardware and software for a modified follow-along of KiCad 6 STM32 PCB Design Full Tutorial - Phil's Lab #65

Parts

40
QtyValueFootprintReferences
7100nCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C6, C7, C9, C13
41k5Resistor_SMD:R_0402_1005MetricR3, R5, R6, R7
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2, J3
210pCapacitor_SMD:C_0402_1005MetricC10, C11
2120RInductor_SMD:L_0603_1608MetricFB1, FB2
21uCapacitor_SMD:C_0402_1005MetricC1, C8
222uCapacitor_SMD:C_0805_2012MetricC14, C15
25k1Resistor_SMD:R_0402_1005MetricR8, R9
10RResistor_SMD:R_0402_1005MetricR4
110KResistor_SMD:R_0402_1005MetricR1
110kResistor_SMD:R_0402_1005MetricR2
110nCapacitor_SMD:C_0402_1005MetricC12
110uCapacitor_SMD:C_0603_1608MetricC2
116mhzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1REDLED_SMD:LED_0603_1608MetricD1
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW2
1TYPE-C-31-M-12TYPE-C-31-M-12:HRO_TYPE-C-31-M-12J4

Similar boards

  • 2 layers42.3 × 101.1 mmSTM32F103 DEV BOARD, the printed circuit board in 3D

    STM32F103 DEV BOARD

    laforestlabs/KiCraft

    KiCad PCB automation toolkit — placement, routing, scoring, and experiment management

    20 parts
  • 2 layers68 × 40 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    44 parts170CC0-1.0
  • 2 layers99.1 × 58.4 mmHEAT, the printed circuit board in 3D

    HEAT

    milar111/HEAT

    An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.

    57 parts9
  • 2 layers71.3 × 25.4 mmUSB DALI, the printed circuit board in 3D

    USB DALI

    even-notodd/USB-DALI

    USB-DALI interface converter

    43 parts4
  • 2 layers78 × 60 mmDC Motor Controller, the printed circuit board in 3D

    DC Motor Controller

    minhle4397/Line-Follower-Robot-v2

    Improved Hardware and Firmware for Line Follower Robot

    53 parts3
  • 4 layers36 × 36 mmTrackMAG, the printed circuit board in 3D

    TrackMAG

    mupfdev/TrackMAG

    An open hardware development board primarily intended for the development of accessible input devices.

    58 parts3
  • 2 layers154.7 × 113 mmDeskMixer, the printed circuit board in 3D

    DeskMixer

    RaduAndre/DeskMixer

    DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.

    113 parts3

Questions

How big is the Stm32 PCB?

It measures 44 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stm32 use?

40 parts, built around the STM32F103C8T6, AMS1117-3.3 and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm32 KiCad files?

From the npgo22/stm32_kicad repository on GitHub, at the commit this page was made from: the board is stm32/stm32.kicad_pcb and its schematic stm32/stm32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask npgo22 before reusing the design.