Skip to the content
2 layers69.6 × 65.1 mmZ84C00, the printed circuit board in 3D

Z80(Z84C00) CPU board

Size
69.6 × 65.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
80
Pads
239
Tracks, vias
898, 91
Routed
Yes
KiCad
KiCad 4
Created
24 Aug 2016
Updated
24 Aug 2016

Overview

Z84C00 is an open-source printed circuit board by nosuz, from the nosuz/Z84C00-borad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 69.6 × 65.1 mm with 37 parts on 80 nets, routed with 898 tracks and 91 vias.

It is built around the ATMEGA64A-AU, FT240XS-R and SG-8002DC-MPT. Its parts include 10 capacitors, 9 resistors, 4 diodes, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Z80(Z84C00) CPU board

This board is designed for running CP/M.

ItemSpec
CPUZ84C00
Memory Size128KiB
CPU ClockMax. 14MHz
InterfaceUSB

The USB port is used as a interface to connect with the subsystem that controles a console and disk drives.

File nameContents
Z8S180.pdfCircuit drawing(PDF)
Z8S180.xlsxBOM list(Excel)
Z8S180.zipzipped Gerber files

References

Z80マイコンボードの製作

Parts

37
QtyValueFootprintReferences
60.1unosuz:C_2012C1, C5, C6, C7, C8, C9
4Mount_Holenosuz:HOLE-M3M1, M2, M3, M4
310knosuz:R_1608R3, R4, R9
20.1uFnosuz:C_2012C4, C10
227Rnosuz:R_1608R6, R7
247pFnosuz:C_2012C2, C3
2>6.2knosuz:R_1608R1, R2
14.7uFnosuz:CP_SMD_D5CP1
1>3.1knosuz:R_1608R5
1>8.4knosuz:R_1608R8
1ATMEGA64A-Anosuz:QFP-64_14x14_Atmel64A-1.00IC1
1BITMAP_IMAGEnosuz:Icon_NosuzIMG1
1CONN_AVR_ISPnosuz:AVR_ISP_2x03CON1
1FT240XSnosuz:SSOP-24_FT240XSU1
1M68AF127Bnosuz:SO32_STM_M68AF127BMEM1
1OSBL1608nosuz:1608_OSxx1608D4
1OSHR1608nosuz:1608_OSxx1608D2
1OSYG1608nosuz:1608_OSxx1608D3
1OSYL1608nosuz:1608_OSYL1608D1
1SG8002DCnosuz:DIP8_2227MC-08CO1
1Tactile_SW_4Pnosuz:SKRPACE010SW1
1USB-micro-Bnosuz:USB-micro-B_HiroseCON2
1Z84C00PEGnosuz:DIP-40_Z84C00CPU1

Similar boards

  • 2 layers310 × 134 mmRosco m68k keyboard-2, the printed circuit board in 3D

    Rosco m68k keyboard-2

    rosco-m68k/rosco_keyboard

    Really Old-School Computer Keyboard

    197 parts1GPL-2.0
  • 4 layers47 × 50 mmPar2Ser, the printed circuit board in 3D

    Par2Ser

    jbilander/Par2Ser

    A device that bridges the Amiga parallel port to a USB FIFO (FT240X)

    42 parts3CC-BY-SA-4.0
  • 4 layers214 × 170 mmC68, the printed circuit board in 3D

    C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    160 parts51GPL-2.0
  • 2 layers39.9 × 54.6 mmSimplecodec3, the printed circuit board in 3D

    Simplecodec3

    cyberomusubi/simplecodec3

    Audio input/output board for Raspberry Pi, Jetson Nano (PCM5102A+PCM1808)

    44 parts19
  • 2 layers155 × 114 mmIOExpansion, the printed circuit board in 3D

    IOExpansion

    ja1umi/MUTIF09Project

    Various design materials for building my 8-bit-microprocessor-based single board computer(s)

    198 parts10MIT
  • 2 layers155 × 114 mmMutif1613, the printed circuit board in 3D

    Mutif1613

    ja1umi/MUTIF1613Project

    Verious design information related to my home-brewed MN1613 16-bit computer

    60 parts3MIT
  • 2 layers50.2 × 69.8 mmZx50 Clock Mezzanine, the printed circuit board in 3D

    Zx50 Clock Mezzanine

    mmosko/Zx50

    This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

    22 parts
  • 2 layers40 × 34 mmDD HIP9011, the printed circuit board in 3D

    DD HIP9011

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    37 parts1.2k

Questions

How big is the Z84C00 PCB?

It measures 69.6 × 65.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Z84C00 use?

37 parts, built around the ATMEGA64A-AU, FT240XS-R and SG-8002DC-MPT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Z84C00 KiCad files?

From the nosuz/Z84C00-borad repository on GitHub, at the commit this page was made from: the board is Z84C00.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Z84C00 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).