2 layers
Driver
Caraffa-git/LM3410X-Laser-Driver
Yet another CC laser diode driver based on LM3410X
10 partsGPL-3.0
4 layers152.4 × 31.8 mm
INCLINOMETER BOARD
noeljary/InclinometerRP2040 based digital inclinometer/speedometer using 1.28" round LCDs - camper van levelling and more.
- Size
- 152.4 × 31.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 74
- Pads
- 243
- Tracks, vias
- 317, 106
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jul 2021
- Updated
- 27 Nov 2023
Overview
INCLINOMETER BOARD is an open-source printed circuit board by noeljary, from the noeljary/Inclinometer repository on GitHub. It is a 4-layer board of 152.4 × 31.8 mm with 61 parts on 74 nets, routed with 317 tracks and 106 vias.
It is built around the NEO-M9N-00B and SS0540. Its parts include 9 capacitors, 9 connectors, 7 resistors, 6 ICs and 6 diodes.
Main components
2README
README.mdInclinometer
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | passives:R0805 | R3, R4, R5, R7 |
| 4 | Conn_01x08 | connectors:TE-292228-8 | J1, J2, J3, J4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | ~ | integrated_circuits:SEEED_XIAO | IC2, IC3, IC4, IC5 |
| 3 | 100n | passives:C0805 | C1, C3, C7 |
| 3 | Conn_01x04 | connectors:TE-292228-4 | J5, J6, J8 |
| 3 | SS0540 | passives:SOD-123 | D3, D4, D5 |
| 3 | ~ | optoelectronics:1206 | D1, D2, D6 |
| 2 | 10u | passives:C0805 | C4, C5 |
| 2 | 1u | passives:C0805 | C6, C8 |
| 1 | 10 | passives:R0805 | R6 |
| 1 | 22k1 | passives:R0805 | R1 |
| 1 | 27n | passives:L0805 | L2 |
| 1 | 47p | passives:C0805 | C9 |
| 1 | 4u7 | passives:C0805 | C2 |
| 1 | 69k8 | passives:R0805 | R2 |
| 1 | 8u2 | passives:L6055 | L1 |
| 1 | Battery_Cell | passives:BAT-MS621 | BT1 |
| 1 | Conn_01x03 | connectors:MICROFIT3.0-1x3-HORIZ | J9 |
| 1 | Conn_Coaxial | connectors:FAKRA_R197.160._28 | J7 |
| 1 | G*** | kibuzzard-64EF6B93 | kibuzzard-64EF6B93 |
| 1 | G*** | kibuzzard-650ECDAE | kibuzzard-650ECDAE |
| 1 | G*** | kibuzzard-650ECDA2 | kibuzzard-650ECDA2 |
| 1 | G*** | kibuzzard-64F4D629 | kibuzzard-64F4D629 |
| 1 | G*** | kibuzzard-64EF6BC1 | kibuzzard-64EF6BC1 |
| 1 | G*** | kibuzzard-64EFA0F6 | kibuzzard-64EFA0F6 |
| 1 | G*** | kibuzzard-65062FEF | kibuzzard-65062FEF |
| 1 | G*** | kibuzzard-64EF9D56 | kibuzzard-64EF9D56 |
| 1 | G*** | kibuzzard-64EF9D40 | kibuzzard-64EF9D40 |
| 1 | G*** | kibuzzard-64EF6BB1 | kibuzzard-64EF6BB1 |
| 1 | G*** | kibuzzard-64F4D53D | kibuzzard-64F4D53D |
| 1 | G*** | kibuzzard-64EF9D48 | kibuzzard-64EF9D48 |
| 1 | G*** | kibuzzard-64EF9CA5 | kibuzzard-64EF9CA5 |
| 1 | G*** | kibuzzard-64EFA8FB | kibuzzard-64EFA8FB |
| 1 | G*** | kibuzzard-64EF9CAD | kibuzzard-64EF9CAD |
| 1 | G*** | kibuzzard-64DFFC28 | kibuzzard-64DFFC28 |
| 1 | G*** | kibuzzard-64F4D513 | kibuzzard-64F4D513 |
| 1 | NEO-M9N | integrated_circuits:UBLOX-NEO-M9N | IC6 |
| 1 | ~ | integrated_circuits:SOT23-6 | IC1 |
Similar boards
- 4 layers194.3 × 92.8 mm
- 2 layers50.8 × 22.9 mm
Feather NEO M9N GPS
averywallis/Feather-NEO-M9N-GPS
KiCad files for a NEO-M9N GPS Featherwing
61 parts6GPL-3.0 - 4 layers60.7 × 61.3 mm
Power Unit
Project-SkyFall/CanSat-2023
This is repository for Czech CanSat team Project SkyFall
162 parts6 - 4 layers72 × 78.5 mm
DashSight Mezzanine Card
DashSight/Pine64-Mezzanine-Card
A PineA64 mezzanine card for adding support to communicate with a vehicle's OBD2 port, obtain GPS location and determine acceleration, designed in KiCAD
88 parts3 - 4 layers61 × 79 mm
RP2350 80QFN minimal
Sphyrna-029/Pico-Pilot
A simple auto pilot for land/water based robots based on the Raspberry Pi rp2350B/2354B
75 parts3 - 4 layers42 × 65 mm
Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 6 layers90 × 90 mm
Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0
Questions
How big is the INCLINOMETER BOARD PCB?
It measures 152.4 × 31.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the INCLINOMETER BOARD use?
61 parts, built around the NEO-M9N-00B and SS0540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the INCLINOMETER BOARD KiCad files?
From the noeljary/Inclinometer repository on GitHub, at the commit this page was made from: the board is board/INCLINOMETER_BOARD.kicad_pcb and its schematic board/INCLINOMETER_BOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the INCLINOMETER BOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask noeljary before reusing the design.