2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers56.1 × 65 mm
Shooting
Noe-Sanchez/ShootingSystemPCB1- Size
- 56.1 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 32
- Pads
- 73
- Tracks, vias
- 64, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Feb 2023
- Updated
- 22 Feb 2023
Overview
Shooting is an open-source printed circuit board by Noe-Sanchez, from the Noe-Sanchez/ShootingSystemPCB repository on GitHub. It is a 2-layer board of 56.1 × 65 mm with 7 parts on 32 nets, routed with 64 tracks and 0 vias.
Its parts include 5 connectors and 1 IC.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x06_Male | Connector_JST:JST_XA_S06B-XASK-1_1x06_P2.50mm_Horizontal | J3, J4, J5, J6 |
| 1 | LOGO | LOGO | G*** |
| 1 | RPI3-MODBP-BULK | RPI3-MODBP-BULK:MODULE_RPI3-MODBP-BULK | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the Shooting PCB?
It measures 56.1 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shooting use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shooting KiCad files?
From the Noe-Sanchez/ShootingSystemPCB repository on GitHub, at the commit this page was made from: the board is shooting.kicad_pcb and its schematic shooting.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shooting design in my own project?
Its repository states no licence, so its author keeps all rights: ask Noe-Sanchez before reusing the design.