2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers
Sns node
noahp/sns_nodesnsnode ===== Wireless sensor node system, comprised of 3(+1) components: Sensor Node (2.4GHz low power radios) Network Monitor (network interface) Internet Bridge (user interface) (Repeater, optional, range extender)
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 24
- Pads
- 114
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 18 Feb 2014
- Updated
- 24 Apr 2014
Overview
Sns node is an open-source printed circuit board by noahp, from the noahp/sns_node repository on GitHub. It is a 2-layer board with 33 parts on 24 nets.
Its parts include 10 resistors, 8 connectors, 6 ICs, 4 capacitors and 3 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdsns_node
Wireless sensor node system, comprised of 3(+1) components:
- Sensor Node (2.4GHz low power radios)
- Network Monitor (network interface)
- Internet Bridge (user interface)
- (Repeater, optional, range extender)
parts
node micro
mouser part MKL02Z8
datasheet
ref manual
network monitor micro
mouser part MKL26Z256
datasheet
ref manual
power
low power lps
inductor 4.7uH
battery holder AA
battery holder AAA
ldo 3.3v, datasheet
usb connector
micro b temp/humidity sensor
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 3M | SM0402 | R1, R3, R10, R11 |
| 2 | 100K | SM0402 | R8, R9 |
| 2 | 1uF | SM0402 | C3, C4 |
| 2 | MOSFET_N | SOT23 | Q1, Q3 |
| 1 | +3.3v | TEST_0.100 | P3 |
| 1 | 1.3M | SM0402 | R5 |
| 1 | 10uF | SM0402 | C2 |
| 1 | 1M | SM0402 | R4 |
| 1 | 240K | SM0402 | R6 |
| 1 | 4.7uF | SM0402 | C1 |
| 1 | 510K | SM0402 | R7 |
| 1 | AAT3220_SC-59-3 | sc59 | U5 |
| 1 | ARM_10PIN | ARM_10_PIN_SMT | J2 |
| 1 | BATT+ | TEST_0.100 | P2 |
| 1 | BATT- | TEST_0.100 | P1 |
| 1 | GND | TEST_0.100 | P5 |
| 1 | INDUCTOR | CDRH4D18C_inductor | U1 |
| 1 | JUMPER | jmp_small | JP1 |
| 1 | MCP1640_SOT23 | MCP1640 | U2 |
| 1 | MKL02ZXVFG4 | MKL02_QFN16 | U4 |
| 1 | MOSFET_P | SOT23 | Q2 |
| 1 | NRF24L01_MOD_HDR | nrf24_8pin | U6 |
| 1 | SCL | TEST_0.100 | P4 |
| 1 | SDA | TEST_0.100 | P6 |
| 1 | SI7020 | si7020_dfn6 | U3 |
| 1 | SW_PUSH | spst_pushbutton_smd | SW1 |
| 1 | USB-MICRO-B | usb_micro_b_smt | J1 |
Questions
What parts does the Sns node use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sns node KiCad files?
From the noahp/sns_node repository on GitHub, at the commit this page was made from: the board is hw/sns_node.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sns node design in my own project?
Its repository states no licence, so its author keeps all rights: ask noahp before reusing the design.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
