2 layers74.5 × 56.3 mm
PowerBook
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
83 parts459GPL-3.0
2 layers135 × 135 mm
COMPRESSORFOC
nmscode/PriusCompressorDriver1This is a driver that is meant to work with SIMPLEFOC to drive a Prius Compressor Motor at 200V from 120V mains.
- Size
- 135 × 135 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 71
- Pads
- 253
- Tracks, vias
- 308, 58
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Mar 2024
- Updated
- 14 Jul 2024
Overview
COMPRESSORFOC is an open-source printed circuit board by nmscode, from the nmscode/PriusCompressorDriver repository on GitHub. It is a 2-layer board of 135 × 135 mm with 83 parts on 71 nets, routed with 308 tracks and 58 vias.
It is built around the S10JC-HF. Its parts include 32 capacitors, 19 resistors, 13 connectors, 5 ICs and 5 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdPrius Compressor Driver
This is a driver that is meant to work with SIMPLEFOC to drive a Prius Compressor Motor at 200V from 120V mains.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10m | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R6, R8, R9, R10, R11, R12 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11, C12, C13, C15, C21 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C10, C14 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C17, C18, C22 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7 |
| 3 | 2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C19, C20 |
| 3 | 47k | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R17, R18, R19 |
| 3 | INA240A2DR | COMPRESSORFOC:INA240A1DR | U2, U3, U5 |
| 2 | S10JC-HF | Diode_SMD:D_SMC_Handsoldering | D3, D4 |
| 2 | 1000uF | COMPRESSORFOC:1000uCap | C25, C26 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R14 |
| 2 | 1u | Capacitor_SMD:C_2225_5664Metric_Pad1.80x6.60mm_HandSolder | C30, C31 |
| 2 | 4.7u | COMPRESSORFOC:4.7uCap | C28, C29 |
| 2 | CLV1L-FKB | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D1, D2 |
| 1 | SBR20A300CTB-13 | COMPRESSORFOC:TO-263-2-FOC | D5 |
| 1 | 10 | COMPRESSORFOC:snubber_resistor | R16 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 12.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 15V+ | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J8 |
| 1 | 15V- | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J9 |
| 1 | 1600pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 1n | COMPRESSORFOC:snubber_capacitor | C32 |
| 1 | 25.5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 26.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 270pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 3.3V | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J6 |
| 1 | 470uF | COMPRESSORFOC:470uFCap | C27 |
| 1 | Conn_01x03_Socket | COMPRESSORFOC:IEC_plugin | J12 |
| 1 | Conn_01x03_Socket | COMPRESSORFOC:TerminalBlock3pin | J13 |
| 1 | ESP32-PICO-KIT_ESP32-PICO-KIT | COMPRESSORFOC:XCVR_ESP32-PICO-KIT | J1 |
| 1 | Fan 1+ | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J4 |
| 1 | Fan 1- | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J5 |
| 1 | Fan 2+ | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J10 |
| 1 | Fan 2- | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J11 |
| 1 | GND | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J3 |
| 1 | L | COMPRESSORFOC:WETORINDUCTOR | L1 |
| 1 | NMOSIPD50R280CEAUMA1 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | Pin 1 | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J2 |
| 1 | Pin 2 | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J7 |
| 1 | Thermistor_NTC | COMPRESSORFOC:NTC_compressorfoc | TH1 |
| 1 | standoff hole | COMPRESSORFOC:standoff hole | |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ~ | COMPRESSORFOC:IM323L6G2XKMA1 | U1 |
| 1 | ~ | COMPRESSORFOC:KBJ-2 Rectifier | BridgeRectifier1 |
The 79 most common of 83 parts.
Questions
How big is the COMPRESSORFOC PCB?
It measures 135 × 135 mm and has 2 copper layers, 1.6 mm thick.
What parts does the COMPRESSORFOC use?
83 parts, built around the S10JC-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the COMPRESSORFOC KiCad files?
From the nmscode/PriusCompressorDriver repository on GitHub, at the commit this page was made from: the board is COMPRESSORFOC.kicad_pcb and its schematic COMPRESSORFOC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the COMPRESSORFOC design in my own project?
Its repository states no licence, so its author keeps all rights: ask nmscode before reusing the design.
Similar boards
- 2 layers170.7 × 64.1 mm
- 2 layers144 × 80 mm
DVDLaserScanner
GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope
83 parts345GPL-3.0 - 2 layers58 × 58 mm
- 2 layers147.9 × 104.8 mm
- 2 layers121.9 × 128.3 mm
Plinkyblackfront bigholes
plinkysynth/plinky_public
a public release of the plinky sw and hw
83 parts227 - 2 layers186 × 36 mm
AddOnB
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
83 parts226CC-BY-SA-4.0 - 2 layers53 × 53 mm
Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0