2 layers40 × 20 mm
2 layers50.8 × 25.4 mm
LVDS Flex
nmrossomando/LVDSflextestTest design for LVDS and Flex PCB
- Size
- 50.8 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 22
- Pads
- 64
- Tracks, vias
- 254, 190
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Feb 2019
- Updated
- 19 Feb 2019
Overview
LVDS Flex is an open-source printed circuit board by nmrossomando, from the nmrossomando/LVDSflextest repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 50.8 × 25.4 mm with 13 parts on 22 nets, routed with 254 tracks and 190 vias.
Its parts include 4 capacitors, 4 resistors, 2 ICs and 2 connectors.
README
README.mdLVDSflextest
Test design for OSH Park's new flex PCB service. And also a test design for some LVDS stuff.
I have designed for neither before. I'm sure it'll be fine.
For the flex pcb test, I was asked to:
- Have thin traces (check, 6 mil except for 3V3 and GND)
- Fill (check, ground planes on both layers)
- Tent vias (check)
- I quote, "Stitch the crap out of it" (check, double check, triple check)
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 0.004uF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | SN65LVDS049PWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2 |
| 1 | Val** | Dragon:DRAGON2 | Ref** |
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the LVDS Flex PCB?
It measures 50.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LVDS Flex use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LVDS Flex KiCad files?
From the nmrossomando/LVDSflextest repository on GitHub, at the commit this page was made from: the board is LVDS_Flex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LVDS Flex design in my own project?
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).