4 layers111.8 × 80.8 mm
4 layers50.3 × 63.5 mm
Quad Prototype
nmikstas/atari_pokey20Recreation of the Atari POKEY chip (work in progress)
- Size
- 50.3 × 63.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 141
- Pads
- 472
- Tracks, vias
- 821, 168
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Dec 2022
- Updated
- 10 Dec 2024
Overview
Quad Prototype is an open-source printed circuit board by nmikstas, from the nmikstas/atari_pokey repository on GitHub. It is a 4-layer board of 50.3 × 63.5 mm with 113 parts on 141 nets, routed with 821 tracks and 168 vias.
It is built around the 74LVC125AD, LD1117S33TR(MS) and SSM3K72KCT,L3F. Its parts include 32 transistors, 24 resistors, 9 capacitors, 8 ICs and 3 connectors.
Main components
3
74LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, Transceivers
LD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SSM3K72KCT,L3F
CST-31 N-channel 1.3pF 1.5Ω@10V 2.1V 400mA 40pF 5.5pF 500mW 600pC@4.5V 60V N-Channel CST-3 MOSFETs ROHSToshibaMOSFETs
README
README.mdatari_pokey
Recreation of the Atari POKEY chip (work in progress)
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | ~ | POKEY_Footprints:TP | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +21 |
| 32 | SSM3K72KCT | POKEY_Footprints:CST3_TOS | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +16 |
| 8 | .1uf | Capacitor_SMD:C_0201_0603Metric | C1, C3, C4, C5, C6, C7, C8, C9 |
| 4 | 1.65K 1% | Resistor_SMD:R_0201_0603Metric | R2, R8, R14, R20 |
| 4 | 24K 1% | Resistor_SMD:R_0201_0603Metric | R5, R11, R17, R23 |
| 4 | 3.3K 1% | Resistor_SMD:R_0201_0603Metric | R3, R9, R15, R21 |
| 4 | 7.68K 1% | Resistor_SMD:R_0201_0603Metric | R4, R10, R16, R22 |
| 4 | 75K 1% | Resistor_SMD:R_0201_0603Metric | R6, R12, R18, R24 |
| 4 | 825 1% | Resistor_SMD:R_0201_0603Metric | R1, R7, R13, R19 |
| 3 | 74LVC125 | POKEY_Footprints:DHVQFN14_SOT762-1_NEX | U3, U7, U8 |
| 3 | ~ | POKEY_Footprints:XSON8 | U4, U5, U6 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | LD1117S33TR | POKEY_Footprints:Reg | U1 |
| 1 | ~ | POKEY_Footprints:VQFN20_RKS_TEX | U2 |
| 1 | ~ | POKEY_Footprints:Con_2X20 | J1 |
| 1 | ~ | POKEY_Footprints:Proto-72Pin | J2 |
Questions
How big is the Quad Prototype PCB?
It measures 50.3 × 63.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Quad Prototype use?
113 parts, built around the 74LVC125AD, LD1117S33TR(MS) and SSM3K72KCT,L3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quad Prototype KiCad files?
From the nmikstas/atari_pokey repository on GitHub, at the commit this page was made from: the board is PCB/Quad_Prototype/Quad_Prototype.kicad_pcb and its schematic PCB/Extender_Board/Extender_Board/Extender_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quad Prototype design in my own project?
Its repository states no licence, so its author keeps all rights: ask nmikstas before reusing the design.
More from nmikstas/atari_pokey
5- 4 layers50.3 × 63.5 mm
- 2 layers118 × 88.9 mm
Through Hole Quad Xilinx
nmikstas/atari_pokey
Recreation of the Atari POKEY chip (work in progress)
64 parts20 - 2 layers127.5 × 105.4 mm
Though Hole Single Xilinx
nmikstas/atari_pokey
Recreation of the Atari POKEY chip (work in progress)
34 parts20 - 2 layers63.8 × 49.8 mm
Similar boards
- 2 layers67.5 × 67.5 mm
PMOD1
Zalmotek/renesas-ams-osram-pmod1
The evaluation kit contains the following sensors from AMS-Osram: TMF8828 (a direct time-of-flight (dToF) sensor), AS 7331 (a low-power, low noise integrated UV sensor), AS 7343 (a 14-channel highly versatile…
48 parts3 - 4 layers86 × 100 mm
- 2 layers91.2 × 48.3 mm
- 2 layers105 × 160 mm
Bkm-129x simple
Shank-Mods/Wii-BVM-Card
A simplified version of the BKM-129X compatible board.
132 parts26 - 4 layers99 × 99 mm
PrntrBoardV1
ghent360/PrntrBoard
3D Printer controller board using STM32 NUCLEO-F446 kit TMC2130/2660/2209 drivers
238 parts24 - 2 layers89.5 × 86.4 mm
TRS-80-M3-KEY
maboytim/TRS-80_Model3-4_Keyboard-Display-Adapter
FPGA based Interface to replace the keyboard and/or CRT display of a TRS-80 Model 3 or 4 with a PS2 keyboard and VGA or HDMI monitor.
32 parts18Unlicense - 2 layers50 × 50 mm
PlipUltimate
tehKaiN/plipUltimate
Network interface & SD card reader for Classic Amigas
51 parts13GPL-2.0 - 2 layers75.2 × 79.2 mm
TRS-80-M3-VID2
maboytim/TRS-80_Display_Adapter
Display board and CRT replacement for TRS-80 Models 3 and 4 and the big Tandy's.
27 parts12Unlicense