2 layers44.5 × 72.7 mm
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
28 parts2.1k
2 layers67.3 × 80.6 mm
Piconsole
niubit/piconsole3This repository has submodules. To clone add the --recursive option to the git clone command:
- Size
- 67.3 × 80.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 41
- Pads
- 118
- Tracks, vias
- 229, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Apr 2022
- Updated
- 25 Nov 2022
Overview
Piconsole is an open-source printed circuit board by niubit, from the niubit/piconsole repository on GitHub. It is a 2-layer board of 67.3 × 80.6 mm with 28 parts on 41 nets, routed with 229 tracks and 11 vias.
Its parts include 8 switches, 6 resistors, 5 diodes, 2 ICs and 2 connectors. It belongs with the RP2040 boards of this library.
README
README.mdPiConsole - Raspberry Pi Pico Retro Console
This repository has submodules. To clone add the --recursive option to the git clone command:
git clone --recursive https://github.com/niubit/piconsole.gitYou can see a brief description (in spanish) in this site. A full description in english is available in Instructables.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5 |
| 1 | 47 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | A | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW5 |
| 1 | B | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW6 |
| 1 | Bat | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Down | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW2 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | J2 |
| 1 | GREEN | LED_THT:LED_D5.0mm | D4 |
| 1 | IR | LED_THT:LED_D5.0mm_IRGrey | D1 |
| 1 | LDR | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R6 |
| 1 | LOGO | eduardofilo_footprints:niubit_logo_13mm | G*** |
| 1 | LOGO | eduardofilo_footprints:niubit_logo_52mm | G*** |
| 1 | Left | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW3 |
| 1 | OLED | eduardofilo_footprints:OLED-SSD1309-SPI | U2 |
| 1 | Pico | eduardofilo_footprints:raspberrypi-pico-module | U1 |
| 1 | Pot | eduardofilo_footprints:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_mod | RV1 |
| 1 | RED | LED_THT:LED_D5.0mm | D2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | Right | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW4 |
| 1 | SW_SPDT | eduardofilo_footprints:SW_SPDT_Angled | SW7 |
| 1 | Up | eduardofilo_footprints:SW_PUSH_8mm_2pin | SW1 |
| 1 | YELLOW | LED_THT:LED_D5.0mm | D3 |
The 27 most common of 28 parts.
Similar boards
- 2 layers95 × 54 mm
EinkPDA screen
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
28 parts2kApache-2.0 - 2 layers137.2 × 41.5 mm
Breakout 64pin 176122-6-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
28 parts1.2k - 2 layers45 × 45 mm
Smartbuttons
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
28 parts915 - 2 layers24.1 × 36.2 mm
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 2 layers34.8 × 12.2 mm
- 2 layers55.9 × 99.1 mm
Stm32f0 disco Luos shield
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
28 parts546MIT - 2 layers88 × 25 mm
EleLab v2 Frontpanel a
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
28 parts531GPL-3.0
Questions
How big is the Piconsole PCB?
It measures 67.3 × 80.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Piconsole use?
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piconsole KiCad files?
From the niubit/piconsole repository on GitHub, at the commit this page was made from: the board is pcb/piconsole.kicad_pcb and its schematic pcb/piconsole.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piconsole design in my own project?
Its repository states no licence, so its author keeps all rights: ask niubit before reusing the design.