
MTR Tiny MD
MoreThanRobotsFR/MTR_Tiny_MD
This Arduino project utilizes SimpleFOC library for sensor-based brushless motor control with a DRV8316 driver. It also incorporates an Adafruit NeoPixel for visual feedback.

Nitrokey Pro GD32 Hardware
Cryptostick is an open-source printed circuit board by Nitrokey, from the Nitrokey/nitrokey-pro-gd32-hardware repository on GitHub. It is a 2-layer board of 21.8 × 16.3 mm with 34 parts on 46 nets, routed with 349 tracks and 46 vias.
It is built around the GD32F103CBT6, DF5A5.6JE,LM and 8Z-12.000MAAJ-T, with the KPHBM-2012SURKCGKC among its other parts. Its parts include 10 capacitors, 9 connectors, 7 resistors, 3 ICs and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8 |
| 5 | debug-pin | footprints:Prog_Pad_Circular | p1, p2, p3, p5, p6 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 4.7pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C9, C11 |
| 2 | 499R | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 8Z-12.000MAAJ-T | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | AP7340-33FS4-7 | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U2 |
| 1 | CONN_4 | SIL-2-2-drilled-offset | P1 |
| 1 | DF5A5.6JE | Package_TO_SOT_SMD:SOT-553 | U3 |
| 1 | GD32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | KPHBM-2012SURKCGKC | KPHBM-2012SURKCGKC | D1 |
| 1 | PROG_VCC | footprints:Prog_Pad_Circular | p4 |
| 1 | SIM_JACKET | molex78646-3001 | J1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | USB_A | USB-A-PLUG | J2 |

MoreThanRobotsFR/MTR_Tiny_MD
This Arduino project utilizes SimpleFOC library for sensor-based brushless motor control with a DRV8316 driver. It also incorporates an Adafruit NeoPixel for visual feedback.


conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style




Nitrokey/nitrokey-start-hardware
Crypto Stick is a USB 32-bit computer with STM32F103 processor and an OpenPGP smart card. It has a minimalistic design, the MCU is running at 72MHz, and it has a SWD port for main flash ROM update.

It measures 21.8 × 16.3 mm and has 2 copper layers, 1 mm thick.
34 parts, built around the GD32F103CBT6, DF5A5.6JE,LM, 8Z-12.000MAAJ-T and KPHBM-2012SURKCGKC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nitrokey/nitrokey-pro-gd32-hardware repository on GitHub, at the commit this page was made from: the board is cryptostick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nitrokey before reusing the design.