

Hardware layout of the Nitrokey FIDO2
- Size
- 21.8 × 16.3 mm
- Copper layers
- 2
- Thickness
- 1.5 mm
- Parts
- 33
- Nets
- 43
- Pads
- 133
- Tracks, vias
- 337, 37
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Feb 2019
- Updated
- 25 Jun 2020
Overview
Nk fido2 is an open-source printed circuit board by Nitrokey, from the Nitrokey/nitrokey-fido2-hardware repository on GitHub. It is a 2-layer board of 21.8 × 16.3 mm with 33 parts on 43 nets, routed with 337 tracks and 37 vias.
It is built around the MTCH101-I/OT, DF5A5.6JE,LM and CLMVC-FKA-CL1D1L71BB7C3C3. Its parts include 7 capacitors, 7 resistors, 5 ICs, 3 connectors and 2 inductors. It belongs with the STM32 boards of this library.
Main components
3MTCH101-I/OT
SOT-23-6-40℃~+85℃ 1 2V~5.5V 340uA 97uA Capacitive Touch SOT-23-6 Touch Sensors ROHSMicrochip TechnologyTouch SensorsDF5A5.6JE,LM
SOT-553-51uA 2.5V 5.3V 65pF ESD IEC 61000-4-2 SOT-553-5 ESD and Surge Protection (TVS/ESD) ROHSToshibaESD And Surge Protection (TVS/ESD)CLMVC-FKA-CL1D1L71BB7C3C3
SMD-4P-40℃~+100℃ 1.9V、2.9V、3V 460nm~475nm、520nm~535nm、619nm~624nm 49mW、49mW、60mW 5mA 71mcd、112mcd、355mcd Common Anode Red, Green, Blue Water Clear SMD-4P LED Indication - Discrete ROHSCree LEDLED Indication - Discrete
README
README.mdnitrokey-fido2-hardware
Hardware layout of the Nitrokey FIDO2
This project is licensed under CC BY-SA 4.0
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | debug-pin | footprints:Prog_Pad_Circular | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 4K7 | Resistor_SMD:R_0402_1005Metric | R1, R3, R5, R7 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C7 |
| 2 | TouchPAD_WE_3029040030030 | footprints:WE-SMGS_3029040030025 | P1, P2 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 68R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AMS3956 | library:MLPD3X3_24 | U5 |
| 1 | ATECC608A | footprints:UDFN-8Pad | U4 |
| 1 | CLMVC-FKA-CL1D1L71BB7C3C3 | footprints:LED_Cree-PLCC4_2x2mm_CW | D2 |
| 1 | DF5A5.6JE | Package_TO_SOT_SMD:SOT-553 | U3 |
| 1 | Fiducial_0.5mm_Dia_1mm_Outer | Fiducial:Fiducial_0.5mm_Dia_1mm_Outer | FID4 |
| 1 | MOLEX_NFC_COIL_1462360101 | library:COIL2_26 | L2 |
| 1 | MTCH101 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | NCP114AMX330TCG | library:REG_NCP114AMX330TCG_21 | L1 |
| 1 | SJ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SJ1 |
| 1 | STM32L432KCUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | USB_Plug | footprints:USB-A-PLUG | J1 |
Similar boards
- 2 layers21.8 × 16.3 mm

- 2 layers21.8 × 16.3 mm

Nk start
Nitrokey/nitrokey-start-hardware
Crypto Stick is a USB 32-bit computer with STM32F103 processor and an OpenPGP smart card. It has a minimalistic design, the MCU is running at 72MHz, and it has a SWD port for main flash ROM update.
39 parts5 - 2 layers140 × 70 mm

- 2 layers41.4 × 47.5 mm

U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers21.8 × 16.3 mm

- 4 layers40 × 17.6 mm

- 2 layers21.8 × 16.3 mm

- 2 layers40.5 × 47.5 mm

Questions
How big is the Nk fido2 PCB?
It measures 21.8 × 16.3 mm and has 2 copper layers, 1.5 mm thick.
What parts does the Nk fido2 use?
33 parts, built around the MTCH101-I/OT, DF5A5.6JE,LM and CLMVC-FKA-CL1D1L71BB7C3C3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nk fido2 KiCad files?
From the Nitrokey/nitrokey-fido2-hardware repository on GitHub, at the commit this page was made from: the board is nk-fido2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nk fido2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nitrokey before reusing the design.