
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

IOT based traffic light smart control innovation is an open-source printed circuit board by Nithishwaran37, from the Nithishwaran37/PCB-Assingnment repository on GitHub. It is a 2-layer board of 129 × 116.5 mm with 11 parts on 47 nets, routed with 66 tracks and 0 vias.
It is built around the ASMB-MTB1-0A3A2. Its parts include 4 ICs, 3 diodes and 2 resistors. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
View this project on CADLAB.io.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | ASMB-MTB1-0A3A2 | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | D4, D5, D6 |
| 2 | IRM-H6xxT | OptoDevice:Everlight_IRM-H6xxT | U3, U4 |
| 1 | Arduino_UNO_R2 | Module:Arduino_UNO_R2 | A2 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | ESP-PSRAM32 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | R | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | R_Small_US | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | TSDP341xx | OptoDevice:Vishay_MOLD-3Pin | U2 |

QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

antmicro/oculink-pcie-adapter
PCB design which converts an OCuLink connector into x16 PCIe slot

antmicro/com-express-7-baseboard
This project contains open hardware design files for a baseboard supporting COM Express 7 modules. The board breaks-out major communications and peripheral interfaces provided by the standard.

antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.

Kingdragoncat/Knox-Key
Knox Key is a high-performance, open-source hardware authenticator designed for secure digital identity and cryptographic operations.

hlord2000/nPM1300-Stamp-Carrier
A carrier board for the nPM1300 Stamp

abenstirling/SASG
USB-powered, single-channel, low-frequency signal analyser and signal generator

antmicro/job-ict-bottom-board
Adapter board for In-Circuit Testing (ICT) of the Antmicro's Jetson Orin Baseboard
It measures 129 × 116.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the ASMB-MTB1-0A3A2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nithishwaran37/PCB-Assingnment repository on GitHub, at the commit this page was made from: the board is IOT based traffic light smart control innovation/IOT based traffic light smart control innovation.kicad_pcb and its schematic IOT based traffic light smart control innovation/IOT based traffic light smart control innovation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nithishwaran37 before reusing the design.