
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Mp3dia is an open-source printed circuit board by nimitvijayvargee, from the nimitvijayvargee/mp3dia repository on GitHub. It is a 2-layer board of 66 × 109.2 mm with 29 parts on 52 nets, routed with 327 tracks and 52 vias.
Its parts include 7 switches, 6 diodes, 6 connectors and 3 resistors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 4 | SW_Push_45deg | Button_Switch_THT:SW_PUSH-12mm | SW4, SW5, SW6, SW7 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J5 |
| 2 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2, SW3 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | TP4056 Charging Module | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
The 24 most common of 29 parts.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 66 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nimitvijayvargee/mp3dia repository on GitHub, at the commit this page was made from: the board is PCB/mp3dia.kicad_pcb and its schematic PCB/mp3dia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nimitvijayvargee before reusing the design.