Skip to the content
2 layers100 × 35 mmDeskthing, the printed circuit board in 3D

Spotify car thing made for your desk!

Size
100 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
33
Pads
61
Tracks, vias
74, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2025
Updated
15 Aug 2025

Overview

Deskthing is an open-source printed circuit board by nimitvijayvargee, from the nimitvijayvargee/deskthing repository on GitHub. It is a 2-layer board of 100 × 35 mm with 7 parts on 33 nets, routed with 74 tracks and 2 vias.

Its parts include 1 connector and 1 switch. It belongs with the RP2040 boards of this library.

README

README.md

deskthing

Spotify car thing made for your desk!

This project uses a Raspberry Pi Pico W and some cheap components, which puts the components cost just around $10. It acts as an interface for your spotify playback, allowing you to change tracks, fast forward, pause or play from a single input knob. The design is based on the spotify car thing and a tiny FM radio look. The main assembly comprises of 4 screws, ssome basic assembly and 3 3D printed case parts. It is intended to be a quick, practical project that helps me keep my phone away; since I can do any music stuff on this device. image image image image image image

BOM

Parts

7
QtyValueFootprintReferences
1RaspberryPi_Pico_WModule:RaspberryPi_Pico_Common_THTA1
1RotaryEncoder_Switch_MPRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHolesSW1
1ST7735R TFT LCDConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1

The 3 most common of 7 parts.

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Deskthing PCB?

It measures 100 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Deskthing use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Deskthing KiCad files?

From the nimitvijayvargee/deskthing repository on GitHub, at the commit this page was made from: the board is PCB/deskthing.kicad_pcb and its schematic PCB/deskthing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Deskthing design in my own project?

Its repository states no licence, so its author keeps all rights: ask nimitvijayvargee before reusing the design.