Skip to the content
2 layers155 × 42 mmOverlordInterface, the printed circuit board in 3D

OverlordInterface

Nimfrodian/Overlord

Code repository for the Overlord home automation system

Size
155 × 42 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
72
Pads
136
Tracks, vias
162, 151
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Jun 2023
Updated
10 Oct 2026

Overview

OverlordInterface is an open-source printed circuit board by Nimfrodian, from the Nimfrodian/Overlord repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 155 × 42 mm with 44 parts on 72 nets, routed with 162 tracks and 151 vias.

Its parts include 5 connectors and 3 diodes. It belongs with the home automation and IoT boards of this library.

README

README.md

Overlord

Code repository for the Overlord home automation system

This GitHub repository contains the code and documentation for a home automation project based on a custom board built around the ESP32-WROOM-32D processor. The board is designed to centralize home automation and provide control for various switches, low voltage devices, relay boards, power meters, and other modules. The primary goal of this project is to create a home automation system that is running as locally as possible while also providing an interface for existing home automation systems that can in turn control it in tandem.

Features Overview

The custom board built on the ESP32 processor offers the following features:

  • Digital Inputs: The board includes digital inputs that can be connected to various switches and sensors in your home. These inputs allow you to detect the state of switches and trigger automation actions based on their status.

  • Digital Outputs: The board is equipped with digital outputs that can drive low voltage devices such as lights, fans, or other appliances. You can use these outputs to control the state of these devices based on your automation rules.

  • Two MODBUS Lines: Two MODBUS lines are included on the board, enabling communication with relay boards and power meters. This allows you to monitor and control multiple devices and measure power consumption within your home automation system.

  • CAN line: The board features a CAN (Controller Area Network) line that provides user input and control capabilities for other devices and modules. You can connect compatible devices to this line and communicate with them using the CAN protocol. This allows easy integration into any existing home automation system that supports CAN.

  • Power output for other devices which can be chosen on the board and can be set to +12V, +5V, or +3.3V.

Getting Started

To get started with this home automation project, follow these steps:

  • Hardware Setup: Set up the custom board based on the ESP32 processor according to the provided documentation. Ensure that all the required connections and modules are correctly attached to the board. You can have your board easily made with the provided .7z file that you simply send to a PCB manufacturer. See Documentation for more.

  • Software Setup: Install the necessary software and dependencies. This typically involves setting up the Visual Studio Code, Platformio IDE and the required libraries for programming the ESP32 board. Refer to the documentation for detailed instructions.

  • Code Configuration: The code generally doesn't need modification to work. See Documentation on how the software is configured to see if you need to make any modifications.

  • Upload the Code: Connect the custom board to your computer using a USB cable and upload the code to the ESP32 board using Platformio IDE the upload process for any errors and ensure successful code transfer.

  • Testing and Integration: Once the code is uploaded, test the functionality of the board by interacting with the switches, devices, and modules connected to it. Verify that the digital inputs, outputs, MODBUS lines, and CAN line are working as intended.

  • Customization and Expansion: Customize the code further to add additional features or integrate with other home automation systems. Expand the functionality of the project to suit your specific needs and preferences.

Documentation

For detailed documentation, including hardware specifications, pin configurations, and usage guidelines, please refer to the Documentation folder in this repository.

Contributing

Contributions to this home automation project are welcome! If you have ideas, suggestions, or improvements, please feel free to open an issue or submit a pull request. Let's collaborate and make home automation better together.

License

This project is licensed under the GNU version 3.0 License. Feel free to use, modify, and distribute the code as per the terms of the license.

Parts

44
QtyValueFootprintReferences
36SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP23 +20
3DE9_Receptacle_MountingHoles_UARTConnector_Dsub:DSUB-9_Female_Vertical_P2.77x2.84mm_MountingHolesJ3, J4, J5
1Conn_01x12_PinConnector_Molex:Molex_Picoflex_90325-0012_2x06_P1.27mm_VerticalJ1
1DE9_Receptacle_MountingHoles_CANConnector_Dsub:DSUB-9_Female_Vertical_P2.77x2.84mm_MountingHolesJ2
1LED_BLED_THT:LED_D3.0mmD1
1LED_GLED_THT:LED_D3.0mmD2
1LED_RLED_THT:LED_D3.0mmD3

More from Nimfrodian/Overlord

1
  • 2 layers155.7 × 86.3 mmOverlord, the printed circuit board in 3D

    Overlord

    Nimfrodian/Overlord

    Code repository for the Overlord home automation system

    230 partsGPL-3.0

Similar boards

  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers115 × 14.5 mmUFC Function Select, the printed circuit board in 3D

    UFC Function Select

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    44 parts431
  • 2 layers37.7 × 20 mmCandleLight, the printed circuit board in 3D

    CandleLight

    HubertD/candleLight

    stm32f0 usb can adapter (KiCAD)

    44 parts400
  • 2 layers88.9 × 88.4 mmTeensypi v91, the printed circuit board in 3D

    Teensypi v91

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    44 parts334GPL-3.0
  • 2 layers125 × 98 mm3-in-1, the printed circuit board in 3D

    3-in-1

    mudmin/AnotherMaker

    This is where I will store code snippets for AnotherMaker Videos

    44 parts258
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 2 layers54.4 × 49.3 mmFx3 tn20k adapter, the printed circuit board in 3D

    Fx3 tn20k adapter

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    44 parts236CC-BY-4.0
  • 2 layers250 × 32 mmPsu, the printed circuit board in 3D

    Psu

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    44 parts222

Questions

How big is the OverlordInterface PCB?

It measures 155 × 42 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OverlordInterface use?

44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OverlordInterface KiCad files?

From the Nimfrodian/Overlord repository on GitHub, at the commit this page was made from: the board is other/KiCad_files/OverlordInterface/OverlordInterface/OverlordInterface.kicad_pcb and its schematic other/KiCad_files/Overlord/InputMux.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OverlordInterface design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).