
RobotASK
NiebieskiRekin/RobotASK
A Piano Tiles (mobile game) hardware autoclicker built on the ATmega328. University group project for RoboDay 2024.

A Piano Tiles (mobile game) hardware autoclicker built on the ATmega328. University group project for RoboDay 2024.
Photoresistor array is an open-source printed circuit board by NiebieskiRekin, from the NiebieskiRekin/RobotASK repository on GitHub. It is a 2-layer board of 110 × 25 mm with 10 parts on 6 nets, routed with 65 tracks and 0 vias.
Its parts include 8 resistors and 2 connectors.
A Piano Tiles (mobile game) hardware autoclicker built on the ATmega328. All electrical sketches and the PCB were designed in KiCad. Code for the microprocessor was written in C++ using Arduino and Servo libraries as well as the PlatformIO VSCode extension.
This project also has a live visualisation Python script that communicates with the main board over serial to display data captured by the photoresistor module. This script can also be used to quickly adjust some parameters at the start of runtime.
This repository was created for a university group project for RoboDay 2024 at Poznań University of Technology. Made by: Tomasz Pawłowski, Jakub Kamieniarz, Jakub Buler, Adam Deter
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Library:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | 5-10k | Library:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R5, R6, R7, R8 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |

NiebieskiRekin/RobotASK
A Piano Tiles (mobile game) hardware autoclicker built on the ATmega328. University group project for RoboDay 2024.

NiebieskiRekin/RobotASK
A Piano Tiles (mobile game) hardware autoclicker built on the ATmega328. University group project for RoboDay 2024.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 110 × 25 mm and has 2 copper layers, 1.07 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NiebieskiRekin/RobotASK repository on GitHub, at the commit this page was made from: the board is KiCad/RobotASK/Photoresistor-array/Photoresistor-array.kicad_pcb and its schematic KiCad/RobotASK/Photoresistor-array/Photoresistor-array.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NiebieskiRekin before reusing the design.