Skip to the content
2 layers49.3 × 26.4 mmNfc card, the printed circuit board in 3D

A NFC PCB business card.

Size
49.3 × 26.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
8
Pads
17
Tracks, vias
18, 2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
23 Jul 2024
Updated
24 Jul 2024

Overview

Nfc card is an open-source printed circuit board by nicolandu, from the nicolandu/nfc_card repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 49.3 × 26.4 mm with 6 parts on 8 nets, routed with 18 tracks and 2 vias.

It is built around the NT3H2111W0FHKH. Its parts include 1 capacitor, 1 resistor, 1 IC and 1 diode. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

nfc_card

This is an adaptation of the OnBoard jam with my own antenna. It is designed in KiCad, with this plugin: https://github.com/Neurotech-Hub/KiCad-Plugins-8.0.

I also designed a simple enclosure, which is to be printed out of TPU for a bit of edge protection to add the card to a keyring. Due to the cost of the PCB and the assembly, I plan to keep the board and to tap it to transmit my contact info, rather than necessarily handing out the contraption.

See https://cad.onshape.com/documents/652e3e97175898963abc7477/w/3581c96ca1af5364a35a6b2c/e/11e05677b8a6fddd2746e93f for the housing's design files.

Parts

6
QtyValueFootprintReferences
1220nFCapacitor_SMD:C_0402_1005MetricC1
125x48mmNFC:Antenna_25x48mmAE1
147Resistor_SMD:R_0402_1005MetricR1
1LEDLED_SMD:LED_0805_2012MetricD1
1NT3H2111W0FHKHNT3H2111W0FHKH:QFN50P160X160X50-8NIC1

The 5 most common of 6 parts.

Similar boards

  • 2 layers85.4 × 54.1 mmBusiness Card v2, the printed circuit board in 3D

    Business Card v2

    WiHarper/nfc-card

    Open-Source Active PCB Business Card Powered by NFC

    39 parts105
  • 4 layers150 × 50 mmEmber, the printed circuit board in 3D

    Ember

    notaroomba/ember

    A custom hot plate powered by USB-C Power Delivery.

    136 parts25
  • 2 layers95.9 × 95 mmHnr26-badge, the printed circuit board in 3D

    Hnr26-badge

    nushackers/hnr26-badge-quacknroll

    Hack&Roll 2026 "Quack & Roll" badge source files, for both hardware and firmware

    77 parts8
  • 2 layers63.5 × 88.9 mmCHEAPSUITS, the printed circuit board in 3D

    CHEAPSUITS

    geg-tech/cheapsuit

    a NFC PCB card with a cyberpunk/poker aesthetic

    36 parts3
  • 2 layers93.2 × 100 mmBadge dragonJar-2025, the printed circuit board in 3D

    Badge dragonJar-2025

    ElectronicCats/badge-dragonJar-2025

    ¡El badge oficial de DragonJarCON 2025! Un dispositivo NFC programable con pantalla OLED, múltiples LEDs y un reto de hacking integrado. Diseñado para la comunidad de DragonJar

    66 parts2
  • 2 layers99.6 × 49.8 mmStasis badge, the printed circuit board in 3D

    Stasis badge

    MeghanaM4/stasis-badge

    74 parts2
  • 2 layers85.1 × 53.3 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    ACW-Electronics/PCB-Business-Card

    Making an NFC PCB Business Card

    6 parts1

Questions

How big is the Nfc card PCB?

It measures 49.3 × 26.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nfc card use?

6 parts, built around the NT3H2111W0FHKH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nfc card KiCad files?

From the nicolandu/nfc_card repository on GitHub, at the commit this page was made from: the board is nfc_card.kicad_pcb and its schematic nfc_card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nfc card design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).