

Steno
Steno keyboard
- Size
- 247.6 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 34
- Pads
- 254
- Tracks, vias
- 137, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jul 2024
- Updated
- 1 Mar 2025
Overview
Steno is an open-source printed circuit board by nicolandu, from the nicolandu/steno repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 247.6 × 95.3 mm with 40 parts on 34 nets, routed with 137 tracks and 0 vias.
It belongs with the RP2040 boards of this library.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | SW_Push | MX_Modified:SW_Cherry_MX_1.00u_PCB | SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26 +6 |
| 6 | SW_Push | MX_Modified:SW_Cherry_MX_2.00u_PCB | SW1, SW2, SW3, SW4, SW9, SW10 |
| 1 | RaspberryPi_Pico_W | PiPico:RaspberryPi_Pico_Common | A1 |
The 29 most common of 40 parts.
Similar boards
- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm

Questions
How big is the Steno PCB?
It measures 247.6 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Steno use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Steno KiCad files?
From the nicolandu/steno repository on GitHub, at the commit this page was made from: the board is steno.kicad_pcb and its schematic steno.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Steno design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).