2 layers85.6 × 26 mm
Game boy pico link board
agtbaskara/game-boy-pico-link-board
An Open-Source USB to Gameboy Link Cable Adapter for Raspberry Pi Pico
6 parts51MIT
2 layers76.8 × 74.9 mm
Wled driver nodemcu v2
nicoandra/iot-devicesIOT schematics, PCBs and Yamls
- Size
- 76.8 × 74.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 31
- Pads
- 79
- Tracks, vias
- 52, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jan 2022
- Updated
- 15 Jan 2022
Overview
Wled driver nodemcu v2 is an open-source printed circuit board by nicoandra, from the nicoandra/iot-devices repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.8 × 74.9 mm with 16 parts on 31 nets, routed with 52 tracks and 0 vias.
It is built around the BOB-12009 and L7805. Its parts include 5 diodes, 2 resistors, 1 capacitor and 1 inductor. It belongs with the ESP8266 boards of this library.
Main components
2README
README.mdiot-devices
IOT schematics, PCBs and Yamls
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH, MH, MH, MH |
| 3 | Screw_Terminal_01x03 | TerminalBlock_Philmore:TerminalBlock_Philmore_TB133_1x03_P5.00mm_Horizontal | D1-GPIO5, D2-GPIO4, D4-GPIO2 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | D5-GPIO14, D6-GPIO12 |
| 1 | BOB-12009 | level:CONV_BOB-12009 | LevelShifter-1 |
| 1 | C | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | L7805 |
| 1 | NodeMCU_Amica_R2 | nodemcu:NodeMCU_Amica_R2 | NodeMCU1Amica1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Philmore:TerminalBlock_Philmore_TB132_1x02_P5.00mm_Horizontal | VIn1 |
Questions
How big is the Wled driver nodemcu v2 PCB?
It measures 76.8 × 74.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wled driver nodemcu v2 use?
16 parts, built around the BOB-12009 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wled driver nodemcu v2 KiCad files?
From the nicoandra/iot-devices repository on GitHub, at the commit this page was made from: the board is wled-driver-nodemcu-v2/wled-driver-nodemcu-v2.kicad_pcb and its schematic wled-driver-nodemcu-v2/wled-driver-nodemcu-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wled driver nodemcu v2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers70 × 90 mm
- 2 layers76.7 × 35.1 mm
Weather station
VincentKobz/diy-weather-station
The goal is to build from scratch a small intelligent weather station that can be connected to IOT networks.
14 parts2MIT - 2 layers65 × 56 mm
- 2 layers39.5 × 30.5 mm
- 2 layers101.9 × 70 mm
Car LED Controller Schematic V9 - KiCAD
hselomein/Car-LED-Controller
This is a private repo for my car led project
27 parts1 - 2 layers60 × 30 mm
GPIO circuit
JhouLab/Pi5WebcamRecorder
Records MV4 AVI video files from up to 4 simultaneous USB webcams on Raspberry Pi 5
7 parts1 - 16 layers566.8 × 155.3 mm
Total
michelkeijzers/fraxis
This project's personal goal is to learn more about ESP32 with ESP-IDF programming.
106 parts1MIT