nickzentmayer/HUB75-Matrix-Controller1ESP32-S3 based driver board for HUB75 LED panels
HUB75-Matrix Controller is an open-source printed circuit board by nickzentmayer, from the nickzentmayer/HUB75-Matrix-Controller repository on GitHub. It is a 4-layer board of 59 × 53 mm with 52 parts on 69 nets, routed with 465 tracks and 137 vias.
It is built around the ESP32-S3, W25Q128JVSIQ and AMS1117-3.3, with the USBLC6-2SC6, MBR0540 and SFH11-PBPC-D08-ST-BK among its other parts. Its parts include 21 capacitors, 12 resistors, 6 ICs, 5 connectors and 3 inductors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10, R13, R14 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C7, C12, C13, C14, C15, C21 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C11, C17, C20 |
| 2 | 1.8pF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C18, C19 |
| 2 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 2.0nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 2.4nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 22nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 40MHz | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | X1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J2 |
| 1 | EN | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U6 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSM6DSOTR | footprints:LGA-14L_2P5X3X0P86_STM | U1 |
| 1 | MBR0540 | Diode_SMD:D_SOD-123 | D1 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Molex_104031-0811 | J4 |
| 1 | SFH11-PBPC-D08-ST-BK | footprints:SULLINS_SFH11-PBPC-D08-ST-BK | J5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | ~ | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | U5 |
nickzentmayer/Messenger
This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP.
rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
lhm0/rotating_display_color
56 LED rotating color display with RP2040 and ESP32 microcontrollers
lhm0/talking_clock
A talking clock for visually impaired users. ESP32 controlled, fully offline, long battery life.
willianlunca/termokip_hardware
Repositório com arquivos de todo o projeto BillCold
It measures 59 × 53 mm and has 4 copper layers, 1.6 mm thick.
52 parts, built around the ESP32-S3, W25Q128JVSIQ, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nickzentmayer/HUB75-Matrix-Controller repository on GitHub, at the commit this page was made from: the board is HUB75_Matrix_Controller.kicad_pcb and its schematic HUB75_Matrix_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nickzentmayer before reusing the design.