
Bemini rp
ianklug/bemini
A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

RP2040 macroboard PCB and firmware
Macro is an open-source printed circuit board by nickyu42, from the nickyu42/duckboard repository on GitHub. It is a 2-layer board of 87.7 × 40.5 mm with 65 parts on 69 nets, routed with 551 tracks and 54 vias.
It is built around the RP2040, W25Q128JVPIQ and AP2112K-3.3, with the WS2812B, BSS138 and TYPE-C-31-M-12 among its other parts. Its parts include 18 capacitors, 12 diodes, 10 resistors, 3 ICs and 3 connectors. It belongs with the RP2040 boards of this library.
This repository contains the PCB design for a 4x4 macroboard with a rotary encoder.




| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C9, C10, C11, C12, C13, C14, C17, C18 |
| 6 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D7, D8, D9, D10, D11, D12 |
| 5 | D_Small | Diode_SMD:D_SOD-323 | D2, D3, D4, D5, D6 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R8, R9, R10 |
| 4 | MX-NoLED | MX_Alps_Hybrid:MX-1U-NoLED | MX1, MX2, MX3, MX4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | Conn_01x01_Male | TestPoint:TestPoint_Pad_2.0x2.0mm | J1, J2, J3 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R7 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 30pF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D_Schottky_Small | Diode_SMD:D_SOD-323 | D1 |
| 1 | LOGO | duck:copper | G*** |
| 1 | LOGO | duck:bg | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles | SW1 |
| 1 | SW_Push | KMR221GLFS:SW_KMR221GLFS | SW2 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | USB1 |
| 1 | W25Q128JVPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
The 63 most common of 65 parts.

ianklug/bemini
A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.


embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products


emertcakir/OmniProbe
Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

PanosEconomou/open-keyboard
A 100% from scratch open source super cool awesome keyboard that will take years to make if ever


It measures 87.7 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
65 parts, built around the RP2040, W25Q128JVPIQ, AP2112K-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nickyu42/duckboard repository on GitHub, at the commit this page was made from: the board is pcb/macro.kicad_pcb and its schematic pcb/macro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nickyu42 before reusing the design.