Skip to the content
2 layers119 × 77.5 mmTp marking keyboard, the printed circuit board in 3D
Size
119 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
65
Pads
458
Tracks, vias
836, 174
Pours
288
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Oct 2025
Updated
30 Oct 2025

Overview

Tp marking keyboard is an open-source printed circuit board by nicklany01, from the nicklany01/tp-marking-keyboard repository on GitHub. It is a 2-layer board of 119 × 77.5 mm with 69 parts on 65 nets, routed with 836 tracks and 174 vias.

It is built around the 1N4148WT and SK6812. Its parts include 37 diodes, 19 switches, 1 resistor, 1 IC and 1 transistor. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

TP Marking Keyboard

Releases

The built program can be found in github actions under the corresponding commit. There will be a file called "fireware.zip" that can be downloaded and flashed to the keyboard.

Flashing Instructions

  1. Connect the keyboard via a USB cable.
  2. Double click the reset button on the keyboard (found below the rotary encoder) to enter bootloader mode. The keyboard should show up as a mass storage device on your computer.
  3. Copy the "firmware.uf2" file from the downloaded release to the mass storage device to flash the keyboard. The storage device should automatically eject and the keyboard will reboot with the new firmware.

Local Build Instructions

Source code is built in github actions using the ZMK firmware framework. To build the firmware locally, follow these steps:

  1. Clone the ZMK repository using the following command:
text
git clone https://github.com/zmkfirmware/zmk.git
  1. Set up the Zephyr SDK as described here
  2. From the zmk directory, run the following commands to build the firwmare, ensuring to replace "/path/to/this/repo/config" with the path to the config directory in this repository:
text
cd app
west build -p -b nice_nano_v2 -- -DSHIELD=tp_marking_keyboard -DZMK_CONFIG=/path/to/this/repo/config

The built firmware file can be found at "/path/to/zmk/app/build/zephyr/zmk.uf2", and can be flashed with the flash instructions above, treating "zmk.uf2" as "firmware.uf2". For more information, see the ZMK documentation and Zephyr documentation

Parts

69
QtyValueFootprintReferences
191N4148WTCustom Footprints:D_SOD-523D1, D2, D3, D4, D5, D6, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19 +3
18SK6812Custom Footprints:SK6812_4020_SIDE_rev2D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35 +2
18SW_PushCustom Footprints:gateron-ks27-hotswap-reversibleSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +2
3, ,
1100kCustom Footprints:0805_2012_nonpolarisedR1
12N7002Custom Footprints:SOT-23-3Q1
1Conn_01x02_SocketCustom Footprints:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1PolyfuseCustom Footprints:0805_2012_nonpolarisedF1
1RotaryEncoder_SwitchCustom Footprints:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW19
1SW_PushCustom Footprints:SW_SPST_FSMSMRSW1
1SW_SPSTCustom Footprints:SW_SPDT_PCM12PSW1
1Sparkfun_Pro_MicroArduino:Sparkfun_Pro_MicroU1

The 66 most common of 69 parts.

Similar boards

  • 4 layers310 × 123 mmVLT, the printed circuit board in 3D

    VLT

    Charading/VLT

    75% Keyboard

    426 parts3
  • 2 layers244.3 × 95 mmChirality, the printed circuit board in 3D

    Chirality

    nicklany01/chirality

    144 parts1
  • 2 layers58 × 58 mmLuma 9, the printed circuit board in 3D

    Luma 9

    notaroomba/luma

    A Minecraft inspired lantern with bluetooth!

    89 parts1
  • 2 layers60.2 × 81.4 mmMacropad, the printed circuit board in 3D

    Macropad

    floris-de-jong/hackpad

    a hachpad how i like it

    26 parts
  • 2 layers98.2 × 77.3 mmMacropad Shiv, the printed circuit board in 3D

    Macropad Shiv

    Shiv12-web/Macropad-Shiv

    35 parts
  • 2 layers299 × 82.5 mmPixelWave, the printed circuit board in 3D

    PixelWave

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    663 parts915
  • 4 layers95 × 95 mmOpenmicro, the printed circuit board in 3D

    Openmicro

    conol-ai/openmicrokbd

    Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org

    88 parts154MIT
  • 2 layers312.5 × 122.3 mmSHEGO75-V5, the printed circuit board in 3D

    SHEGO75-V5

    Charading/Shego75HE

    My endgame 75% hall effect keyboard

    392 parts75

Questions

How big is the Tp marking keyboard PCB?

It measures 119 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tp marking keyboard use?

69 parts, built around the 1N4148WT and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tp marking keyboard KiCad files?

From the nicklany01/tp-marking-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/tp-marking-keyboard.kicad_pcb and its schematic pcb/tp-marking-keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tp marking keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask nicklany01 before reusing the design.