2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269
2 layers38.1 × 48.9 mm
ReflowOven
NicholasA/KiCadPCB Project Files
- Size
- 38.1 × 48.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 37
- Pads
- 86
- Tracks, vias
- 208, 11
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Feb 2018
- Updated
- 22 Feb 2018
Overview
ReflowOven is an open-source printed circuit board by NicholasA, from the NicholasA/KiCad repository on GitHub. It is a 2-layer board of 38.1 × 48.9 mm with 22 parts on 37 nets, routed with 208 tracks and 11 vias.
It is built around the ATMEGA328P-PU. Its parts include 6 resistors and 4 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdKiCad
General KiCad Project Files
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R2, R3, R4, R5, R6 |
| 4 | CP1 | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4 |
| 3 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | Thermocouple1, Thermocouple2, UART1 |
| 2 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | Power1, SSR1 |
| 1 | 330 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | AP1117-33 | TO_SOT_Packages_SMD:SOT-223 | 3.3vReg1 |
| 1 | ATMEGA328P-PU | Housings_DIP:DIP-28_W7.62mm_Socket | Micro1 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | Buttons1 |
| 1 | Conn_01x08 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | Display1 |
| 1 | Crystal | Crystals:Crystal_HC49-4H_Vertical | 16k1 |
The 20 most common of 22 parts.
Questions
How big is the ReflowOven PCB?
It measures 38.1 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ReflowOven use?
22 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ReflowOven KiCad files?
From the NicholasA/KiCad repository on GitHub, at the commit this page was made from: the board is ReflowOven/ReflowOven.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ReflowOven design in my own project?
Its repository states no licence, so its author keeps all rights: ask NicholasA before reusing the design.
Similar boards
- 2 layers76.3 × 122.8 mm
Discipad pcb
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
63 parts221GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers247.6 × 99.2 mm
Romeo pcb
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
138 parts148GPL-3.0 - 2 layers90 × 140 mm
Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
70 parts137 - 2 layers238.1 × 375.5 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers145.3 × 44.5 mm
