

Ir camera
circuit board designs
- Size
- 49.1 × 48.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 34
- Pads
- 93
- Tracks, vias
- 150, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Oct 2017
- Updated
- 15 Sep 2026
Overview
Ir camera is an open-source printed circuit board by ngroesz, from the ngroesz/pcb_design repository on GitHub. It is a 2-layer board of 49.1 × 48.4 mm with 25 parts on 34 nets, routed with 150 tracks and 0 vias.
It is built around the ATMEGA328P-PU, L7805 and LD1117. Its parts include 8 capacitors, 4 resistors, 4 ICs, 2 crystals and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD1117
UncategorisedSTMicroelectronics
README
README.mdpcb_design
circuit board designs
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C8 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C3 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C6, C7 |
| 1 | ATMEGA328P-PU | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | C_Polarized_Small | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C5 |
| 1 | C_Small | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | Display1 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y2 |
| 1 | Crystal_4pin | custom:ECS-100AX | Y1 |
| 1 | L7805 | custom:L7805CV | U1 |
| 1 | LD1117 | custom:LD1117 | U3 |
| 1 | PowerIn | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Programming Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | ProgrammingHeader1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | pixart_ir | custom:pixart_ir | U4 |
More from ngroesz/pcb_design
7- 2 layers72.5 × 61.5 mm

- 2 layers37.7 × 52.9 mm

- 2 layers40.5 × 41.8 mm

- 2 layers36.4 × 34.9 mm

- 2 layers36.4 × 34.9 mm

- 2 layers62.5 × 11 mm

- 2 layers77.5 × 11.3 mm

Similar boards
- 2 layers49.5 × 56.4 mm

Toadstool Mega328
CrashBangProto/Toadstool-Mega328
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.
28 parts1GPL-3.0 - 2 layers75 × 50 mm

- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers20 × 110 mm

- 2 layers100 × 100 mm

Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.
76 parts3 - 2 layers40 × 100 mm

PCB Design
RNA-IITPatna/Flight-Controller
Code related to flight controller for RNA's model rockets
30 parts3 - 2 layers60 × 60 mm

- 2 layers82 × 81 mm

Questions
How big is the Ir camera PCB?
It measures 49.1 × 48.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ir camera use?
25 parts, built around the ATMEGA328P-PU, L7805 and LD1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ir camera KiCad files?
From the ngroesz/pcb_design repository on GitHub, at the commit this page was made from: the board is ir_camera/ir_camera.kicad_pcb and its schematic ir_camera/ir_camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ir camera design in my own project?
Its repository states no licence, so its author keeps all rights: ask ngroesz before reusing the design.