2 layers100 × 100 mm
2 layers112 × 47 mm
Initial Build
nfernoedge/Badge-Preprototype3- Size
- 112 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 30
- Pads
- 91
- Tracks, vias
- 175, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Aug 2023
- Updated
- 10 Sep 2024
Overview
Initial Build is an open-source printed circuit board by nfernoedge, from the nfernoedge/Badge-Preprototype repository on GitHub. It is a 2-layer board of 112 × 47 mm with 34 parts on 30 nets, routed with 175 tracks and 17 vias.
It is built around the BZD27C150P-E3-08, LDEPD2100KA5N00 and APTD2012LSURCK, with the SRR6603-103ML among its other parts. Its parts include 17 resistors, 6 diodes, 3 capacitors, 2 transistors and 2 connectors. It belongs with the PIC boards of this library.
Main components
4BZD27C150P-E3-08
DO-219AB(SMF)1 Independent 138V~156V 150V 1uA@110V 300Ω 800mW DO-219AB(SMF) Zener Diodes ROHSVishay IntertechnologyZener Diodes
LDEPD2100KA5N00
2220-55℃~+125℃ 10nF 630V Metallized Polyester、Metallized Polyethylene Naphthalate ±10% 2220 Film Capacitors ROHSKEMETFilm Capacitors
APTD2012LSURCK
0805-40℃~+85℃ 150mcd 2.1V 2mA 40° 630nm 645nm 75mW Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteSRR6603-103ML
SMD,6.6x4.4mm10mH 17mA 20mA 32.8Ω ±20% SMD,6.6x4.4mm Power Inductors ROHSBournsPower Inductors
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1M8 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R5, R6, R7, R8 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R11, R17, R18 |
| 3 | 330k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14, R15 |
| 3 | BZD27C150P-E3-08 | Diode_SMD:D_SMF | D3, D4, D7 |
| 2 | LDEPD2100KA5N00 | Capacitor_SMD:C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C1, C4 |
| 1 | .1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 1N4148 | Diode_SMD:D_SMB-SMC_Universal_Handsoldering | D5 |
| 1 | 220k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 3k9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | APTD2012LSURCK | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | BSP135H6327XTSA1 | Package_TO_SOT_SMD:SOT-223 | Q4 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | J302 | Geiger:Geiger_Clips | V1 |
| 1 | MMBT3904-7-F | Package_TO_SOT_SMD:SOT-23-3 | Q3 |
| 1 | MURS160-13-F | Diode_SMD:D_SMB_Handsoldering | D2 |
| 1 | PIC12F1572T-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SRR6603-103ML | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
Questions
How big is the Initial Build PCB?
It measures 112 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Initial Build use?
34 parts, built around the BZD27C150P-E3-08, LDEPD2100KA5N00, APTD2012LSURCK and SRR6603-103ML. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Initial Build KiCad files?
From the nfernoedge/Badge-Preprototype repository on GitHub, at the commit this page was made from: the board is First Prototype/Initial Build/Initial Build.kicad_pcb and its schematic First Prototype/Initial Build/Initial Build.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Initial Build design in my own project?
Its repository states no licence, so its author keeps all rights: ask nfernoedge before reusing the design.
More from nfernoedge/Badge-Preprototype
1Similar boards
- 4 layers85.9 × 82 mm
BalloonMotherboardV4
EggiEl/SpiCy-BEXUS
Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…
283 parts1 - 2 layers125 × 145 mm
MPPT
lhr-solar/Power-Generation-Sunscatter
The current maintainer of this project is Matthew Yu as of 07/16/2023. His email is matthewjkyu@gmail.com.
134 parts - 2 layers75 × 28 mm
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm
