Skip to the content
2 layers19 × 26.7 mmAdapter JTAG20PinTo6Pin, the printed circuit board in 3D

Adapter JTAG20PinTo6Pin

newAM/Adapter_JTAG20PinTo6Pin

20-Pin to 6-Pin adapter for JTAG debuggers

Size
19 × 26.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
6
Pads
26
Tracks, vias
19, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
9 Sep 2018
Updated
9 Sep 2018

Overview

Adapter JTAG20PinTo6Pin is an open-source printed circuit board by newAM, from the newAM/Adapter_JTAG20PinTo6Pin repository on GitHub, published under the MIT licence. It is a 2-layer board of 19 × 26.7 mm with 2 parts on 6 nets, routed with 19 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

20-Pin to 6-Pin adapter for JTAG debuggers

This project is a small PCB adapter to convert a 20-Pin JTAG interface into a 6-Pin interface with these signals:

  • VTREF
  • SWCLK
  • GND
  • SWDIO
  • RESET
  • SWO

Media

Assembled Adapter

Project Contents

  • Adapter_JTAG20PinTo6Pin_KiCAD - KiCad PCB and schematic files
  • Adapter_JTAG20PinTo6Pin_Media - photos

Software Used

Parts

2
QtyValueFootprintReferences
1Header 1x6Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mmX2
1Socket 2x10Pin_Headers:Pin_Header_Straight_2x10_Pitch2.54mmX1

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Adapter JTAG20PinTo6Pin PCB?

It measures 19 × 26.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adapter JTAG20PinTo6Pin use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adapter JTAG20PinTo6Pin KiCad files?

From the newAM/Adapter_JTAG20PinTo6Pin repository on GitHub, at the commit this page was made from: the board is Adapter_JTAG20PinTo6Pin_KiCAD/Adapter_JTAG20PinTo6Pin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adapter JTAG20PinTo6Pin design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).