2 layers129.6 × 74.8 mm
2 layers93.5 × 53.5 mm
CrudeCameraSheild
NEUWireless/camera_sensor1- Size
- 93.5 × 53.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 284
- Nets
- 47
- Pads
- 663
- Tracks, vias
- 1,375, 260
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2019
- Updated
- 5 Feb 2020
Overview
CrudeCameraSheild is an open-source printed circuit board by NEUWireless, from the NEUWireless/camera_sensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 93.5 × 53.5 mm with 284 parts on 47 nets, routed with 1,375 tracks and 260 vias.
Its parts include 256 transistors, 18 resistors, 3 switches and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdcamera_sensor
Parts
284| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | ALS-PT19 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | Q1, Q10, Q11, Q100, Q101, Q102, Q103, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112 +240 |
| 16 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R17, R18 |
| 1 | ARDUINO_MEGA_SHIELD | arduino_shields:ARDUINO MEGA SHIELD | SHIELD1 |
| 1 | Button 2 | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW3 |
| 1 | Button 3 | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Horizontal | J1 |
| 1 | LOGO | logo:WirelessClub | G1 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
Questions
How big is the CrudeCameraSheild PCB?
It measures 93.5 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CrudeCameraSheild use?
284 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CrudeCameraSheild KiCad files?
From the NEUWireless/camera_sensor repository on GitHub, at the commit this page was made from: the board is KiCad/CrudeCameraSheild.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CrudeCameraSheild design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers285 × 95.1 mm
- 2 layers391.2 × 166.5 mm
Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 2 layers382.9 × 135.9 mm
Issue 6
alvaroalea/QL_Schematic
Schematic and PCB of the Sinclair QL Computer
284 parts11CERN-OHL-S-2.0 - 2 layers102.4 × 102.4 mm
Generator 5351 rect sine
MR-DOS/generator_5351_rect_sine
Rectangular and sine generator with Si5351 working up to 200 MHz
284 parts6GPL-3.0 - 2 layers106.8 × 96.4 mm
Hasp flight computer
Big-Red-Sat/High-Altitude-Student-Platform
This repository contains the hardware designs, data, and analysis of perovskite solar cells on high altitude balloons
284 parts3 - 2 layers111.5 × 173.3 mm
- 2 layers250 × 250 mm
Grandmakey diodeback
DenkyTuna/grandmakey_v0_5
Custom hardware keyboard for grandMA2 onPC. Prototype (v0.5) bugfix only. Will create another repo in case of major PCB design change.
284 partsMIT