4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0
2 layers52.3 × 35.1 mm
NeuroBytes Touch Sensor
NeuroTinker/NeuroBytes_Touch_SensorAll NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…
- Size
- 52.3 × 35.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 38
- Pads
- 115
- Tracks, vias
- 208, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Apr 2017
- Updated
- 30 Jul 2019
Overview
NeuroBytes Touch Sensor is an open-source printed circuit board by NeuroTinker, from the NeuroTinker/NeuroBytes_Touch_Sensor repository on GitHub. It is a 2-layer board of 52.3 × 35.1 mm with 26 parts on 38 nets, routed with 208 tracks and 18 vias.
It is built around the MMBT3904. Its parts include 7 resistors, 5 capacitors, 3 transistors, 3 connectors and 2 ICs. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
1README
README.mdNeuroBytes Touch Sensory Neuron
The NeuroBytes Touch Sensory Neuron is an open-source hardware neuron simulator designed and sold by NeuroTinker, LLC.
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons Attribution-ShareAlike 4.0 license, available here: http://creativecommons.org/licenses/by-sa/4.0/. The NeuroBytes Touch Sensory Neuron is Certified Open Source Hardware as defined by OSHWA, certification number US000110.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | KiCad_Footprints:ZF_SMD_NonPol_0402 | R5, R6, R7 |
| 3 | MMBT3904 | KiCad_Footprints:ZF_SOT23-3L | Q1, Q2, Q3 |
| 2 | 0u1 | KiCad_Footprints:ZF_SMD_NonPol_0402_cap | C3, C5 |
| 2 | 100 | KiCad_Footprints:ZF_SMD_NonPol_0402 | R2, R3 |
| 2 | 1u | Capacitors_SMD:C_0603_HandSoldering | C1, C4 |
| 2 | CONN_01X04 | KiCad_Footprints:ZF_CONN_JST_GH | P6, P7 |
| 1 | 10u | Capacitors_SMD:C_1206 | C2 |
| 1 | 150 | KiCad_Footprints:ZF_SMD_NonPol_0402 | R1 |
| 1 | 3v3 LDO | KiCad_Footprints:ZF_SOT23-5L | U2 |
| 1 | JMP | KiCad_Footprints:ZF_SMD_NonPol_0402 | R4 |
| 1 | JST_GH_5-pos | KiCad_Footprints:ZF_CONN_JST_GH_5POS | P1 |
| 1 | LED_RABG | KiCad_Footprints:ZF_LED_RGB_SunLED_XZMDKCBDDG45S-9_cast | D1 |
| 1 | LOGO | KiCad_Footprints:ZF_LOGO_Touch_Sensor | G*** |
| 1 | STM32L011Gx | KiCad_Footprints:ZF_IC_UFQFPN28-050 | U1 |
| 1 | SW_PUSH | KiCad_Footprints:ZF_SW_Momentary_SideMtg | SW1 |
| 1 | SW_SNAP_ACTION | KiCad_Footprints:ZF_SW_Momentary_Snap-Action_side-mtg | SW2 |
The 24 most common of 26 parts.
Questions
How big is the NeuroBytes Touch Sensor PCB?
It measures 52.3 × 35.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NeuroBytes Touch Sensor use?
26 parts, built around the MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NeuroBytes Touch Sensor KiCad files?
From the NeuroTinker/NeuroBytes_Touch_Sensor repository on GitHub, at the commit this page was made from: the board is HARDWARE/NeuroBytes_Touch_Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NeuroBytes Touch Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask NeuroTinker before reusing the design.
Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers90 × 25.5 mm
- 4 layers85 × 56 mm
- 4 layers74.5 × 70.3 mm
Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
229 parts628CERN-OHL-S-2.0 - 2 layers148 × 84.5 mm
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 4 layers46.8 × 34.8 mm
SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0