
Motor control
neurobot-1000/neurobot-1000.github.io
Monorepo for the Neurobot-1000 works

Monorepo for the Neurobot-1000 works
Motor power is an open-source printed circuit board by neurobot-1000, from the neurobot-1000/neurobot-1000.github.io repository on GitHub, published under the BSD-3-Clause-Clear licence. It is a 2-layer board of 30 × 30 mm with 10 parts on 54 nets.
It is built around the HYG025N06LS1C2. It belongs with the robots and motor control boards of this library.
I decided to write a web to organize every research, documentation, helper, and many other for Neurobot-1000.
Because it is more accessible than Discord (require no account to look), and discussion/contribution can be made on the repo directly.
All of the required documentation is stored on the site (github pages really), including the individual packages, tools, and recommended contributing setup.
Unless otherwise specified, all of the software work is licensed under BSD-3-Clause-Clear. Every other content that is not software work or not covered under the BSD-3-Clause-Clear is licensed under CC-BY-4.0. The full license can be found at their respective LICENSE.* file. If any work has some special license case, it will be documented in the license folder.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | HYG025N06LS1C2 | EasyEDA:DFN-8_L5.9-W5.2-P1.27-LS6.2-BL | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |

neurobot-1000/neurobot-1000.github.io
Monorepo for the Neurobot-1000 works

opme/motor-driver
open source motor drivers to be driven by foc controller

Ryan-Fagan/QuadcopterPCB
Gerbers, models, & code for an STM32 quadcopter focused on reasearch applications.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the HYG025N06LS1C2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the neurobot-1000/neurobot-1000.github.io repository on GitHub, at the commit this page was made from: the board is packages/pcb-design/motor-power/motor-power.kicad_pcb and its schematic packages/pcb-design/motor-control/motor-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause-Clear licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).