Skip to the content
2 layers65 × 56 mmPi hat, the printed circuit board in 3D

Schaltpläne, Layouts und Firmware für Schließanlage und Rollladensteuerung

Size
65 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
39
Pads
204
Tracks, vias
338, 31
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Sep 2012
Updated
9 Jan 2023

Overview

Pi hat is an open-source printed circuit board by netz39, from the netz39/rollladensteuerung repository on GitHub. It is a 2-layer board of 65 × 56 mm with 64 parts on 39 nets, routed with 338 tracks and 31 vias.

It is built around the M24C02-WMN6, M2.5 and BSS138. Its parts include 28 resistors, 12 transistors, 8 connectors, 5 capacitors and 2 diodes.

Main components

3

README

README.md

Rolladensteuerung

Content

  • controller: Relais-Controller Rollläden
  • manuellsteuerung: Schalter für Manuellbetrieb Rollläden
  • raspberry: Software für den Kontroll-Raspy
  • relaiskarte: Relais Rollläden
  • switchboard: Altes Schalterboard
  • tuer-controller: I2C-Bridge zur Tür-Steuerung
  • tuer-steuerung: Kontrolle Motor und Türstatus-Schalter
  • wd-switch: Watchdog-Switch für Reset per Raspy-

Parts

64
QtyValueFootprintReferences
1010KCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R7, R8, R9, R11, R12, R13, R14, R24, R27
810RCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR4, R5, R6, R15, R16, R17, R23, R26
42.0MountingHole:MountingHole_2.2mm_M2_DIN965MK3, MK4, MK5, MK6
4330RCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR20, R21, R22, R25
4BC 818-25Package_TO_SOT_SMD:SOT-23Q7, Q8, Q9, Q11
4M2.5MountingHole:MountingHole_2.7mm_M2.5MK1, MK2, MK7, MK8
3100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2, C3
3150RCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR18, R19, R28
3AO 3415APackage_TO_SOT_SMD:SOT-23Q1, Q10, Q12
3BSS138Package_TO_SOT_SMD:SOT-23Q2, Q3, Q4
3Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5, J6, J7
23K9Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2, R3
247uCapacitor_SMD:CP_Elec_4x4.5C4, C5
2BC 807-25Package_TO_SOT_SMD:SOT-23Q5, Q6
2Conn_01x04_Malen39_kicad_penguineer:MOLEX-HDD-PWR-horizontalJ2, J4
2Conn_01x07_MaleConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1, J3
147KCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderR10
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalP1
1LEDLED_SMD:LED_0603_1608MetricD2
1LED5 RG-3LED_THT:LED_D5.0mm-3D1
1M24C02-WMNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

Similar boards

  • 4 layers133.8 × 102.9 mmVca backplane, the printed circuit board in 3D

    Vca backplane

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    102 parts68GPL-3.0
  • 2 layers65 × 56 mmPi1541io, the printed circuit board in 3D

    Pi1541io

    hackup/Pi1541io

    Raspberry Pi extension board for the PI1541 project.

    57 parts109CC-BY-SA-4.0
  • 2 layers100 × 100 mmCNC Control Panel, the printed circuit board in 3D

    CNC Control Panel

    comakingspace/Parts

    All upgrade/replacement part files for our machines and tools.

    50 parts2
  • 2 layers65 × 56 mmZephyrus IAQ HAT, the printed circuit board in 3D

    Zephyrus IAQ HAT

    erinjense/raspberrypi-indoor-air-quality-pcb

    Hardware and Software for a Indoor Air Quality Logger

    80 parts2MIT
  • 4 layers236.1 × 156.9 mmImpeller18, the printed circuit board in 3D

    Impeller18

    buglalis/degree

    764 parts
  • 2 layers71.8 × 62.2 mmAir quality pcb v7, the printed circuit board in 3D

    Air quality pcb v7

    NilsEngelbach/air-quality-pcb

    Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.

    85 parts
  • 4 layers50 × 50 mmPlant monitor, the printed circuit board in 3D

    Plant monitor

    PimentoFr/plant-monitor

    Developpement d'un capteur de potager indoor/outdoorn solaire et connecté via Sigfox

    208 parts
  • 4 layers65 × 56.5 mmEscape, the printed circuit board in 3D

    Escape

    winson3QQ/Batman

    Home project for Halow+openMANET on Pi4 & & Seeed WM1302 HAT & Wio-WM6108

    175 parts

Questions

How big is the Pi hat PCB?

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pi hat use?

64 parts, built around the M24C02-WMN6, M2.5 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pi hat KiCad files?

From the netz39/rollladensteuerung repository on GitHub, at the commit this page was made from: the board is pi-hat/pi-hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pi hat design in my own project?

Its repository states no licence, so its author keeps all rights: ask netz39 before reusing the design.