
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

PCB for the "Retrosound Adventskalender"
Retrosound pcb is an open-source printed circuit board by Nervengift, from the Nervengift/retrosound-pcb repository on GitHub. It is a 2-layer board of 57.1 × 57.1 mm with 34 parts on 30 nets, routed with 140 tracks and 6 vias.
It is built around the LM386. Its parts include 8 diodes, 6 capacitors, 5 resistors, 5 switches and 2 ICs.

This is a PCB for the "Elektronik-Retro-Sound Adventskalender" by Franzis press.
The original kit is built on breadboard but I wanted a more durable solution taking less space and made a quick PCB design for it.
All parts are included in the kit except for an optional power switch (SW5) and optional terminal blocks for speaker and battery. I would recommend to at least add pin headers and a jumper for SW5 when soldering the battery pack directly. Otherwise you can't turn the device off without removing the batteries from the holder.
When not using SW5, solder JP1 closed. This will bridge SW5 to be always closed.
| Reference | Value | Notes |
|---|---|---|
| C1-C4 | 104 | |
| C5, C6 | 100uF | white - mark facing left (direction of pots) |
| D1-D8 | LED | short leg facing left |
| R1, R5 | 1kΩ | |
| R2 | 100kΩ | |
| R3 | 560Ω | |
| R4 | 15kΩ | |
| RV1-RV3 | 10kΩ pot | |
| SW1-SW4 | button | |
| U1 | soundchip | |
| U2 | LM386 | |
| BT1 | battery | solder directly or add screw terminal (5mm pitch) |
| LS1 | speaker | solder directly or add screw terminal (5mm pitch) |
| SW5 | (optional, not included originally) add a 2.54mm pitch switch or jumper to switch the battery power on and off | |
| JP1 | solder closed if not using SW5 to force it closed |
CC0, some rights might be reserved by Franzis for the original kit.
But please drop me a note if you do something fun with it :)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 104 | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 3 | 10k | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1, RV2, RV3 |
| 2 | 100uF | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C5, C6 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | Battery_Cell | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | Battery |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW5 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Speaker | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | Speaker |
| 1 | soundchip | retrosound-pcb:DIP-20_W10.16mm | U1 |
The 32 most common of 34 parts.

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO


oskitone/poly555
The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.


It measures 57.1 × 57.1 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nervengift/retrosound-pcb repository on GitHub, at the commit this page was made from: the board is retrosound-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nervengift before reusing the design.