2 layers33 × 34 mm
Analog terminal bell
tenderlove/analog-terminal-bell
A bell for your terminal that is analog
12 parts494MIT
2 layers
Valve Control
NerdST/Filtration-DeviceIED main project. Will contain webapp and microcontroller software
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 40
- Pads
- 68
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Feb 2024
- Updated
- 6 Apr 2024
Overview
Valve Control is an open-source printed circuit board by NerdST, from the NerdST/Filtration-Device repository on GitHub. It is a 2-layer board with 18 parts on 40 nets.
It is built around the TIP122. Its parts include 4 resistors, 4 diodes, 4 transistors, 4 inductors and 1 IC. It belongs with the audio and music boards and the ESP8266 boards of this library.
Main components
1README
README.mdFiltration-Device
IED main project. Will contain webapp and microcontroller software
Gamerville gaming
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 2.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 4 | SOLENOID | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | L1, L2, L3, L4 |
| 4 | TIP122 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x02_Female | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | NodeMCU1.0(ESP-12E) | ESP8266:ESP12F-Devkit-V3 | U1 |
Questions
What parts does the Valve Control use?
18 parts, built around the TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Valve Control KiCad files?
From the NerdST/Filtration-Device repository on GitHub, at the commit this page was made from: the board is Valve-Control/Valve-Control.kicad_pcb and its schematic Valve-Control/Solenoid_Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Valve Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask NerdST before reusing the design.
Similar boards
- 2 layers130 × 80 mm
Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers180 × 90 mm
- 2 layers57.4 × 53.8 mm
Red node with ESP32
futureshocked/NodeRed-ESP32-TerrariumController
This repository contains ESP32 sketches and Node-RED flows from the course "NodeRed ESP32 Make a Terrarium Controller".
25 parts7MIT - 2 layers95.1 × 93.8 mm
TeCoLab Board
ytcsc/TeCoLab
TeCoLab stands for Temperature Control Laboratory. It is a low-cost open-source didactic framework to test the performance of several control strategies regarding temperature control.
61 parts7MIT - 2 layers
LEDControlPCBSMDV2
BioARTS-Lab/Miniature_Microscope
3D-printed fluorescence miniature microscope
31 parts6GPL-3.0 - 2 layers138 × 77 mm
- 2 layers68 × 50.5 mm
Fanspeed
Aniket95-code/Fan-Speed-Controller-NE555-PCB-design
A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…
19 parts2