Skip to the content
2 layers114.3 × 93.7 mmPlanetie, the printed circuit board in 3D

This is a project inspired by Starbie. It's called Planetie since its sort of a rip off and more planet based rather than a star.

Size
114.3 × 93.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
19
Pads
58
Tracks, vias
45, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 Oct 2026
Updated
30 Oct 2026

Overview

Planetie is an open-source printed circuit board by NeoRazer504, from the NeoRazer504/planetie repository on GitHub. It is a 2-layer board of 114.3 × 93.7 mm with 6 parts on 19 nets, routed with 45 tracks and 0 vias.

It is built around the DHT11. Its parts include 2 ICs, 2 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

This is a project inspired by Starbie. It's called Planetie since its sort of a rip off and more planet based rather than a star. It was made it KiCad for hackclub's Half Life program What it does is it displays the main sprite on a OLED screen doing things depending on input from the user or the environment using buttons, and motion and environment sensors. Key differences from the main Starbie project include that the PCB has a different shape: image image image And it also had firmware changes to add a galactic alphabet trail and use my own custom made sprite: df28418925c0c1983e3e36560935c71cfcf10f068746d7f0cc3ac2f7b92fa2b1

To assemble it, get the circuit board printed, get the parts from the BOM, and solder it accordingly. To get the firmware on Xiao, plug it into your computer, hold the reset button, and drag the firmware file into the folder for the Xiao on your computer.

Parts

6
QtyValueFootprintReferences
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
1Conn_01x04_Pinplanetie:Display_128x64_096_I2CJ1
1Conn_01x08_Pinplanetie:MPU6050_ModuleJ2
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1XIAO-ESP32-C3-SMDXIAO:XIAO-ESP32C3-DIPU1

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Planetie PCB?

It measures 114.3 × 93.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Planetie use?

6 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Planetie KiCad files?

From the NeoRazer504/planetie repository on GitHub, at the commit this page was made from: the board is planetie.kicad_pcb and its schematic planetie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Planetie design in my own project?

Its repository states no licence, so its author keeps all rights: ask NeoRazer504 before reusing the design.