Skip to the content
2 layers100 × 100 mmHackPad Neko, the printed circuit board in 3D

HackPad Neko

Neko-22/nekopad
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
34
Pads
162
Tracks, vias
142, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Oct 2024
Updated
22 Oct 2024

Overview

HackPad Neko is an open-source printed circuit board by Neko-22, from the Neko-22/nekopad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 45 parts on 34 nets, routed with 142 tracks and 0 vias.

Its parts include 20 diodes, 2 resistors, 1 IC and 1 connector.

README

README.md

Legally Distinct Catpad

Created for Hack Club Hackpad

BOM

  • 20x Cherry MX style switches
  • 20x 1N418 THT Diodes
  • 2x 4.7kOhm THT Resistors
  • 1x I2C SSD1306 0.91" 128x32 OLED Display
  • 1x XIAO RP2040 Microcontroller THT
  • 1x Bottom Case (3D Print)
  • 1x Top Case (3D Print)
  • 1x Plate (Acryllic Laser Cut)
  • 4x M3 screws

Notes

This was hell ngl. I am absolutely awful at electronics design, and combine that with the joys of Linux software compatability regarding Fusion 360, I have lost so much sleep over this. I honestly think the firmware was the easiest part of this, and that's saying something.

10/10 experience would do again. case v7

Parts

45
QtyValueFootprintReferences
201N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
20MX_SW_solderButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBMX1, MX2, MX3, MX4, MX5, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20 +4
24.7kΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2
1Conn_01x04Misc_Custom:SSD1306-0.91-OLED-4pin-128x32J1
1LOGOMisc_Custom:var2G***
1MOUDLE-SEEEDUINO-XIAOXIAO_PCB:MOUDLE14P-2.54-21X17.8MMU1

Similar boards

  • 2 layers30 × 61.3 mmModuleV440, the printed circuit board in 3D

    ModuleV440

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    45 parts1.1k
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    45 parts517GPL-2.0
  • 2 layers49.8 × 88.9 mmLDG WING FOLD PLACARD, the printed circuit board in 3D

    LDG WING FOLD PLACARD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    45 parts431
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers40.2 × 19 mmOMGS3 Carrier R1, the printed circuit board in 3D

    OMGS3 Carrier R1

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    45 parts296
  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers99.1 × 81.9 mmRC6502 Terminal, the printed circuit board in 3D

    RC6502 Terminal

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    45 parts193GPL-3.0
  • 2 layers116.1 × 94.7 mmMiniDox, the printed circuit board in 3D

    MiniDox

    That-Canadian/MiniDox_PCB

    MiniDox Keyboard, PCB files

    45 parts169WTFPL

Questions

How big is the HackPad Neko PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HackPad Neko use?

45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HackPad Neko KiCad files?

From the Neko-22/nekopad repository on GitHub, at the commit this page was made from: the board is PCB/HackPad_Neko.kicad_pcb and its schematic PCB/HackPad_Neko.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HackPad Neko design in my own project?

Its repository states no licence, so its author keeps all rights: ask Neko-22 before reusing the design.