4 layers54 × 11.6 mm
BrodBoost PD
axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
39 parts38
2 layers22 × 30.2 mm
USB PD Module
NeilKhera/USB-PD-ModuleFixed 15V DC output using USB PD
- Size
- 22 × 30.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 29
- Pads
- 132
- Tracks, vias
- 96, 78
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jun 2023
- Updated
- 20 Jun 2023
Overview
USB PD Module is an open-source printed circuit board by NeilKhera, from the NeilKhera/USB-PD-Module repository on GitHub. It is a 2-layer board of 22 × 30.2 mm with 37 parts on 29 nets, routed with 96 tracks and 78 vias.
It is built around the DMP3013SFV. Its parts include 16 resistors, 8 capacitors, 4 diodes, 2 transistors and 1 IC. It belongs with the power boards of this library.
Main components
1README
README.mdUSB-PD-Module
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5.1K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R7 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 18V | Diode_SMD:D_SOD-123 | D1, D4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C7 |
| 2 | 390pF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | DMP3013SFV | Package_SON:Diodes_PowerDI3333-8 | Q1, Q2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 15V | Diode_SMD:D_SOD-123 | D2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 2.4K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | CYPD3177 | USB-PD:QFN50P400X400X60-25N-D | U1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | FLIP | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers94 × 100 mm
Robocar unified integrated carrier
laurigates/mcu-tinkering-lab
This repository contains projects for various embedded platforms (ESP32, Arduino, STM32).
98 parts7MIT - 4 layers48 × 44.5 mm
Smol servo rpi2350-tmc6200
dognotdog/smol_servo
circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.
151 parts5 - 4 layers65 × 56.8 mm
- 2 layers27.4 × 58.7 mm
Lc29h mikrobus PCB
i2hm/micro_climate_station
Open the KiCad project using KiCad 7 and above.
48 parts3 - 2 layers17.7 × 42.1 mm
Anavi fixed power delivery
AnaviTechnology/anavi-fixed-power-delivery
Small 2-layer fixed USB-C PD power sink with CYPD3177 and 2 pin terminal block.
27 parts2 - 2 layers
- 4 layers53 × 30 mm
P42 PD Sink EPR r2
wolfgangfriedrich/P42-USB-C-PD-Sink-EPR
USB-PD3.1 Sink EPR Diodes AP33771C
57 parts1
Questions
How big is the USB PD Module PCB?
It measures 22 × 30.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB PD Module use?
37 parts, built around the DMP3013SFV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB PD Module KiCad files?
From the NeilKhera/USB-PD-Module repository on GitHub, at the commit this page was made from: the board is USB-PD Module.kicad_pcb and its schematic USB-PD Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB PD Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask NeilKhera before reusing the design.