4 layers29 × 61 mm
Cfxsx
neggles/cfxsx
CFexpress to M.2 NVMe drive adapter. Intended for Xbox Series X and S, but untested.
22 parts69CC-BY-SA-4.0
4 layers29 × 99 mm
Cfxsx-2280
neggles/cfxsx69CFexpress to M.2 NVMe drive adapter. Intended for Xbox Series X and S, but untested.
- Size
- 29 × 99 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 15
- Pads
- 150
- Tracks, vias
- 129, 42
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2021
- Updated
- 8 Aug 2021
Overview
Cfxsx-2280 is an open-source printed circuit board by neggles, from the neggles/cfxsx repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 29 × 99 mm with 56 parts on 15 nets, routed with 129 tracks and 42 vias.
Its parts include 4 capacitors and 1 connector. It belongs with the interfaces and adapters and computers and single-board computers boards of this library.
README
README.mdcfxsx
Xbox Series X/S storage expansion card to M.2 NGFF NVMe SSD adapter. Well, maybe.
The connector the X/S use is CFexpress-adjacent - I have no idea if this will even begin to work, but, YOLO?
But, for real, don't make this. It probably doesn't work at all.
Repository Structure
cfxsxcontains the main schematics and board drawingcfxsx/PCIexpress.prettycontains the board-specific footprintscfxsx/PCIexpress.3dshapescontains the 3D models for parts on the board (and a bunch of extras from my various experiments)
Building
Simply call make in the top-top level directory. The build directory will then contain:
- the main board
- zipped gerbers for the boards you can directly use for manufacturing
- zipped gerbers and SMT assembly BOM/position files for JLCPCB's SMT assembly service for the single-board version.
Makefile uses Jan Mrázek's KiKit, which I cannot recommend enough, and therefore has to be available on your system.
Jan's jlcparts app was also extremely useful in narrowing down part choices based on what JLCPCB have available.
IMPORTANT NOTE: If you give JLCPCB these files as-is, please verify the orientation of every part before submitting.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4 |
| 1 | 2230 | 11-My-Edits:MountingHole_NGFF_4.2mm_Pad_TopBottom | MP1 |
| 1 | 2242 | 11-My-Edits:MountingHole_NGFF_4.2mm_Pad_TopBottom | MP2 |
| 1 | 2260 | 11-My-Edits:MountingHole_NGFF_4.2mm_Pad_TopBottom | MP1 |
| 1 | 2280 | 11-My-Edits:MountingHole_NGFF_4.2mm_Pad_TopBottom | MP1 |
| 1 | CFexpress | 11-My-Edits:CFExpress_Media | PC1 |
| 1 | F_INS | 11-My-Edits:SolderJumper-2_P0.6mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | M.2 NGFF | 10-My-Footprints:AMP_MDT180xxx001_NGFF-KeyM | J1 |
| 1 | logo | 10-My-Footprints:neggle-logo-0.12 | SYM1 |
The 12 most common of 56 parts.
More from neggles/cfxsx
1Similar boards
- 4 layers30.7 × 30 mm
ReCamera B101 v1.2
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
56 parts495Apache-2.0 - 4 layers90.8 × 53.3 mm
- 4 layers46 × 40 mm
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers71 × 10 mm
Ordered jlcpcb 003 dot flipper
pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.
56 parts145GPL-3.0 - 4 layers93.3 × 60.3 mm
Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 4 layers80 × 156 mm
Supercap simple
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
56 parts81 - 4 layers52.8 × 61.2 mm
GameboyCartridgeV1.1
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.
56 parts72CERN-OHL-P-2.0
Questions
How big is the Cfxsx-2280 PCB?
It measures 29 × 99 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cfxsx-2280 use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cfxsx-2280 KiCad files?
From the neggles/cfxsx repository on GitHub, at the commit this page was made from: the board is cfxsx/cfxsx-2280.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cfxsx-2280 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).