Skip to the content
4 layers94 × 119.4 mmCombined, the printed circuit board in 3D

Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

Size
94 × 119.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
19
Nets
60
Pads
118
Tracks, vias
199, 17
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Mar 2024
Updated
23 Oct 2024

Overview

Combined is an open-source printed circuit board by neatstranger, from the neatstranger/pal-collar repository on GitHub. It is a 4-layer board of 94 × 119.4 mm with 19 parts on 60 nets, routed with 199 tracks and 17 vias.

It is built around the ATMEGA168PA-MU, ATGM336H-5N31 and RA-08H(915), with the AP9101CK-AHTRG1, X1B000301000200 and 2N7002E among its other parts. Its parts include 8 ICs, 6 capacitors, 2 transistors and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

7

README

README.md

Pal Collar

What is pal collar?

The collar is a GPS tracking device for your cat/dog, currently being designed with the following charachteristics in mind. - Extremely long battery life - No Monthly subscription required - Pet safe

Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

Parts

19
QtyValueFootprintReferences
610uCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6
3~Package_TO_SOT_SMD:SOT-23-5U5, U6, U7
22N7002EPackage_TO_SOT_SMD:SOT-23Q1, Q2
10.01Resistor_SMD:R_0805_2012MetricR1
1AP9101CK-AHTRG1PARTS:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BLU9
1ATGM336H-5N31PARTS:GPS_BOARDU3
1ATMEGA168PA-MUPARTS:168P_BOARDU1
1KXOB081K06TF-TRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSC1
1RA-08H(915)PARTS:RA_08H-BREAKOUTU2
1RJD2048(Bat)Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1X1B000301000200PARTS:RTC_BOARDU4

More from neatstranger/pal-collar

6
  • 4 layers30.5 × 15.2 mmRTC BREAKOUT, the printed circuit board in 3D

    RTC BREAKOUT

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    11 parts
  • 4 layers45.7 × 30.5 mmGPS Carrier, the printed circuit board in 3D

    GPS Carrier

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    10 parts
  • 4 layers45.7 × 30.5 mmLoRa Carrier, the printed circuit board in 3D

    LoRa Carrier

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    8 parts
  • 4 layers53.3 × 43.2 mmMCU BREAKOUT, the printed circuit board in 3D

    MCU BREAKOUT

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    8 parts
  • 2 layers45.7 × 30.5 mmGPS BREAKOUT, the printed circuit board in 3D

    GPS BREAKOUT

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    3 parts
  • 2 layers45.7 × 30.5 mmRa-08-breakout, the printed circuit board in 3D

    Ra-08-breakout

    neatstranger/pal-collar

    Pal collar will use a Lora-Wan base station, and your internet connection to receive the location from your pet within 1 Mile of your home.

    3 parts

Similar boards

  • 4 layers100 × 100 mmNRC, the printed circuit board in 3D

    NRC

    advaitconty/national-robotics-challenge-submission

    a drone for NRC

    77 parts
  • 4 layers94 × 94 mm-ZFace, the printed circuit board in 3D

    -ZFace

    pleiades-cluster/Xmera-Solar

    The Official Solar Design on PROVES Xmera

    39 parts
  • 2 layers179.5 × 67 mmBms, the printed circuit board in 3D

    Bms

    mandraga/SombreroBms

    A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

    192 parts4
  • 4 layers50 × 40 mmGps watch, the printed circuit board in 3D

    Gps watch

    SuperTails/gps-watch

    Code and design files for the Landhopper GPS watch

    87 partsApache-2.0
  • 2 layers50.1 × 88.2 mmPtFlex, the printed circuit board in 3D

    PtFlex

    custom-ds/ptFlex

    ptFlex tracker board starting with version 2.0 of the hardware, which is based on the improvements found in the ptSolar tracker.

    76 parts3GPL-3.0
  • 2 layers96 × 50 mmPager, the printed circuit board in 3D

    Pager

    justinlindh/bramble

    Privacy-first LoRa mesh networking for ESP32-S3, built with ESP-IDF

    97 parts2MIT

Questions

How big is the Combined PCB?

It measures 94 × 119.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Combined use?

19 parts, built around the ATMEGA168PA-MU, ATGM336H-5N31, RA-08H(915) and AP9101CK-AHTRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Combined KiCad files?

From the neatstranger/pal-collar repository on GitHub, at the commit this page was made from: the board is Combined/Combined.kicad_pcb and its schematic Combined/Combined.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Combined design in my own project?

Its repository states no licence, so its author keeps all rights: ask neatstranger before reusing the design.