

PicoControl
Open Source Astrophotography Hardware and Software
- Size
- 177.8 × 127 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 62
- Pads
- 239
- Tracks, vias
- 219, 284
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Sep 2023
- Updated
- 27 Mar 2025
Overview
PicoControl is an open-source printed circuit board by neatstranger, from the neatstranger/Dagerro repository on GitHub. It is a 2-layer board of 177.8 × 127 mm with 50 parts on 62 nets, routed with 219 tracks and 284 vias.
It is built around the TPS54360BDDAR, RX8025T-UB and B560C-13-F-MS, with the FXL1040-8R2-M among its other parts. Its parts include 15 capacitors, 12 resistors, 10 connectors, 4 ICs and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
4TPS54360BDDAR
SOIC-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersRX8025T-UB
SOP-14-208mil-40℃~+85℃ 0.72uA 1.8V~5.5V 800nA Built-in I2C Temperature compensation、InsideSRAM/NVRAM、Programmable clock output、Alarm function、Built-in crystal oscillator、Periodic interrupt output Yes SOP-14-208mil Real Time Clocks ROHSSeiko EpsonReal Time ClocksB560C-13-F-MS
SMC-65℃~+125℃ 1 Independent 175A 500uA@60V 5A 60V 850mV@5A SMC Schottky Diodes ROHSMSKSEMISchottky DiodesFXL1040-8R2-M
SMD,11.5x10mm27mΩ 8.2uH 8A 9A Molded inductor ±20% SMD,11.5x10mm Molding Power Inductors ROHScjiangPower Inductors
README
README.mdDagerro
The first known attempt at astronomical photography was by Louis Jacques Mandé Daguerre, inventor of the daguerreotype process which bears his name, who attempted in 1839 to photograph the Moon. Tracking errors in guiding the telescope during the long exposure meant the photograph came out as an indistinct fuzzy spot. Source
Guide Timing
Some notes for myself as well as anyone reading. We need to move the steppers about 8 times per second and the Real Time Clock(RTC) doesn't allow for time resolution greater than 1 second. The RTC(DS3231) outputs 32,768 pulses per second on the 32K pin. We attach an interrupt to that pin with the following line.
attachInterrupt(digitalPinToInterrupt(interruptPin), countCycles, CHANGE);
Note the use of the CHANGE for activation. This means that we will capture one interrupt for each rise, and one for each fall.
With our second now divided up into 65,536 segments.
1 Degree = 60 ArcMinutes
1 ArcMinute = 60 ArcSeconds
1 Degree = 3600 ArcSecondsHow fast does the earth rotate? My previous assumption of 1ArcSecond/Second is wrong. Let's do the math.
360° = 24 Hours
15° = 1 Hour or 60 Minutes or 3600 Seconds
1° or 3600 ArcSeconds = 4 Minutes or 240 Seconds
Math = 3600(ArcSeconds-Angle)/240 (Seconds-Time)
15 ArcSeconds(Angle) = 1 Second(Time)The arduino receive exactly 1,658,880 pulses every 25.3125 seconds. During this period of time, we need to take exactly 1500 steps.
python function to solve the problem.
x = 1
maxcount = 1500
xmult = 1105
ymult = 1107
while x <= maxcount:
y = maxcount - x
if (xmult*x)+(ymult*y) == 1658880:
print(x)
print(y)
print((xmult*x) + (ymult*y))
x+=1I used this script, changing the values for xmult and ymult, until I got a result that looks like this:
810
690
1658880Which means that if we take a step every 1105 interrupts, 810 times. Followed by taking a step every 1107 interrupts, 690 times. We will have taken 1500 steps in exactly 25.3125 seconds.
1500 Steps * 0.253125 ArcSeconds Per Step = 379.6875 ArcSeconds
379.6875 ArcSeconds / 25.3125 Seconds
15 ArcSeconds / SecondParts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C1, C2, C8, C9 |
| 4 | 47u | Capacitor_SMD:C_1206_3216Metric | C6, C7, C13, C14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C10, C15 |
| 2 | 10.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R8 |
| 2 | 13k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R6 |
| 2 | 162k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R5 |
| 2 | 39p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C12 |
| 2 | 5k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10 |
| 2 | 6800p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C11 |
| 2 | B560C-13-F | PARTS:SMC_L7.1-W6.2-LS8.1-RD | D1, D2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3, J5 |
| 2 | FXL1040-8R2-M | PARTS:IND-SMD_L11.5-W10.0_FXL1040 | L1, L2 |
| 2 | TPS54360BDDAR | PARTS:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL-EP2.0 | U1, U2 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 53.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 81.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | Battery | PARTS:CONN-TH_2P-P5.00_WJ500V-5.08-2P | CN1 |
| 1 | Camera | PARTS:CONN-TH_2P-P5.00_WJ500V-5.08-2P | CN5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | DEC | PARTS:CONN-TH_5P-P5.08_DIBO_DB128V-5.08-5P-GN-S | CN3 |
| 1 | EQ | PARTS:CONN-TH_5P-P5.08_DIBO_DB128V-5.08-5P-GN-S | CN2 |
| 1 | FOCUS | PARTS:CONN-TH_5P-P5.08_DIBO_DB128V-5.08-5P-GN-S | CN4 |
| 1 | Pi-Power | PARTS:USB-A-TH_USB-231-ARY | USB1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U4 |
| 1 | RX8025T-UB | PARTS:SOIC-14_L10.1-W5.0-P1.27-LS7.4-BL | U3 |
More from neatstranger/Dagerro
5- 4 layers56.4 × 56.4 mm

- 4 layers194.1 × 115.6 mm

- 2 layers

- 2 layers35.6 × 33 mm

- 2 layers35 × 30 mm

Similar boards
- 6 layers80.9 × 63 mm

- 4 layers120 × 130 mm

- 4 layers449.2 × 272.9 mm

Board v4 pre v5
lolz0r/Williams-WPC-Power-Driver-Board-A-12697-3
Untested, unverifed, AI created design.
415 parts2 - 6 layers100 × 53.8 mm

- 6 layers60 × 48 mm

Quadesc
embedconsult/quadesc
BeagleConnect QuadESC is a four-motor power board with BeagleConnect Torque installed as its system-on-module. This repository contains the editable mainboard and module designs, schematics, firmware sources and…
247 parts9 - 2 layers73 × 79 mm

- 4 layers150 × 107.5 mm

Base
bornier-dev/bornier
Open source EtherCAT slaves for machine tools running LinuxCNC: hardware, firmware and tooling.
517 parts - 4 layers62 × 60 mm

TIAGO gripper
hardware-designs-iai/tiago_robotiq_adapter
PCB designs to connect a Robotiq gripper to the TIAGo.
62 parts
Questions
How big is the PicoControl PCB?
It measures 177.8 × 127 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PicoControl use?
50 parts, built around the TPS54360BDDAR, RX8025T-UB, B560C-13-F-MS and FXL1040-8R2-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PicoControl KiCad files?
From the neatstranger/Dagerro repository on GitHub, at the commit this page was made from: the board is Electronics/PicoControl/PicoControl.kicad_pcb and its schematic Electronics/Driver/Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PicoControl design in my own project?
Its repository states no licence, so its author keeps all rights: ask neatstranger before reusing the design.