Skip to the content
2 layers64.3 × 22 mmUSBHubV3, the printed circuit board in 3D

Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

Size
64.3 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
36
Pads
113
Tracks, vias
249, 37
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jan 2026
Updated
30 Aug 2026

Overview

USBHubV3 is an open-source printed circuit board by nearestexit, from the nearestexit/mx-unsaver repository on GitHub, published under the MIT licence. It is a 2-layer board of 64.3 × 22 mm with 34 parts on 36 nets, routed with 249 tracks and 37 vias.

It is built around the FE1.1S-BSOP28BCN and SRV05-4. Its parts include 12 capacitors, 9 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the keyboards and input boards of this library.

Main components

2

README

README.md

mx-unsaver

Custom keyboard and numpad inspired by vintage Cherry keyboards and the IBM "Unsaver". Designed in Onshape and KiCad. Powered by QMK.

Front

Overview

  • Side profile and shape inspired by the Cherry G80-5700 and G80-1800
  • PCB Top-Mount
  • Integrated USB Hub with 1x USB-C Upstream port and 2x USB-C and 2x USB-A Downstream ports
  • Brass through-weight

Back

Combo1

Case Source (Onshape): https://cad.onshape.com/documents/1d9e79a61d42e7395c429f47/w/28912f958105e1c831f67a9e/e/537bd51b2d234361e6d6eea3

Combo2

PCB

The PCB supports ISO and ANSI. Unfortunately, due to an oversight, the Case only supports ANSI enter. It could be relatively easily modified to support ISO enter. I ordered single bare PCBs from EuroCircuits and OSHPark and hand-soldered the components, so I do not have JLCPCB production files available.

Important: The PCB has the words "Made In Germany" printed on it. This is because it was actually manufactured in Germany. If you choose to have it manufactured in China, please remove this logo from the PCB.

PCB

Bill of Materials

USB Hub

The USB Hub utilizes two FE1.1S USB 2.0 HS Hub chips in series. It can deliver a total of 400mA downstream (the keyboard is assumed to use 100mA).

Firmware

A QMK .bin file is provided for flashing, as well as QMK source files.

Unsaver

(The original Unsaver in this picture is not for sale.)

Parts

34
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0603_1608MetricC3, C4, C11, C12
410kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4
3510Resistor_SMD:R_0603_1608MetricR7, R8, R10
3LED_SmallLED_SMD:LED_0603_1608MetricD1, D3, D4
2100uCapacitor_SMD:C_1206_3216MetricC7, C8
210uCapacitor_SMD:C_0603_1608MetricC5, C6
21uCapacitor_SMD:C_0603_1608MetricC9, C10
233pCapacitor_SMD:C_0603_1608MetricC1, C2
26364372-2mx-unsaver:TE_6364372-2J1, J2
2MountingHoleMountingHole:MountingHole_2.7mm_M2.5H2, H3
2SRV05-4PCM_marbastlib-various:SOT-23-6-routableU5, U6
11kResistor_SMD:R_0603_1608MetricR9
12.7kResistor_SMD:R_0603_1608MetricR5
1Conn_01x04Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ3
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1FE1.1s-BSOP28BCNPackage_SO:SSOP-28_3.9x9.9mm_P0.635mmU1
1MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965_PadH1

More from nearestexit/mx-unsaver

5
  • 2 layers391.8 × 105.4 mmMx unsaver main, the printed circuit board in 3D

    Mx unsaver main

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    248 parts40MIT
  • 2 layers225.2 × 48.2 mmMx unsaver frow, the printed circuit board in 3D

    Mx unsaver frow

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    57 parts40MIT
  • 2 layers96.1 × 29.3 mmUSB A Daughterboard, the printed circuit board in 3D

    USB A Daughterboard

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    57 parts40MIT
  • 2 layers74.3 × 105.4 mmMx unsaver numpad, the printed circuit board in 3D

    Mx unsaver numpad

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    50 parts40MIT
  • 2 layers24 × 16 mmNumpad Daughterboard, the printed circuit board in 3D

    Numpad Daughterboard

    nearestexit/mx-unsaver

    Custom Keyboard & Numpad inspired by the IBM "Unsaver", designed with Onshape and KiCad

    9 parts40MIT

Similar boards

  • 2 layers50 × 38 mmFlow3r pot, the printed circuit board in 3D

    Flow3r pot

    timonsku/flow3r-pot

    Helper tool for running UART over USB-C SBU pins for embedded debugging purposes

    31 parts1CERN-OHL-P-2.0
  • 4 layers161 × 87 mmMainPCB, the printed circuit board in 3D

    MainPCB

    rohit-env/minideck-pcb

    so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.

    194 parts
  • 4 layers104 × 69.4 mmDock, the printed circuit board in 3D

    Dock

    gamebub/gamebub-pcb

    PCB design files for the Game Bub project

    125 parts31CERN-OHL-S-2.0
  • 4 layers99.9 × 80.4 mmPBITzBackplaneMezzanine, the printed circuit board in 3D

    PBITzBackplaneMezzanine

    dumaiss/pBITzPlatform

    Code, documentation and schematics for the pBITz backplane and associated assets

    43 parts
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers142.5 × 101 mmHillside46, the printed circuit board in 3D

    Hillside46

    mmccoyd/hillside

    Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

    92 parts448MIT
  • 4 layers40.6 × 17.8 mmPD Micro, the printed circuit board in 3D

    PD Micro

    ryan-ma/PD_Micro

    USB-C PD3.0 PPS on ATMega32U4 Arduino board

    61 parts439MIT
  • 2 layers139.1 × 107.7 mmLotus58 Glow 151, the printed circuit board in 3D

    Lotus58 Glow 151

    TweetyDaBird/Lotus-58-Classic

    A split ergo linear keyboard derived from the Lily58 family

    153 parts390

Questions

How big is the USBHubV3 PCB?

It measures 64.3 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USBHubV3 use?

34 parts, built around the FE1.1S-BSOP28BCN and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USBHubV3 KiCad files?

From the nearestexit/mx-unsaver repository on GitHub, at the commit this page was made from: the board is USBHubV3/USBHubV3.kicad_pcb and its schematic Numpad_Daughterboard/Numpad_Daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USBHubV3 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).