
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

PCB For Santroller direct-wired controller for Les Paul Guitar Hero (Wii)
GH LP Wii is an open-source printed circuit board by ndrew222, from the ndrew222/GH-LP-Wii repository on GitHub. It is a 2-layer board of 100 × 55 mm with 6 parts on 34 nets, routed with 63 tracks and 0 vias.
It belongs with the audio and music boards and the RP2040 boards of this library.
This repo contains files for my prototype to create a PCB for the Wii Les Paul guitar. The design will aim to utilise at most 2 layers, without the need for vias, so that I can use the school's PCB maker.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push_45deg | PCM_Switch_Keyboard_Alps_Matias:SW_Alps_Matias | SW_DOWN1, SW_UP1 |
| 1 | R_Potentiometer | Library:Whammy Pot | RV1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Whammy Pot | Library:Whammy Pot | BUTTONS_12 |
| 1 | ~ | Library:Frets | Neck1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ndrew222/GH-LP-Wii repository on GitHub, at the commit this page was made from: the board is GH LP Wii.kicad_pcb and its schematic GH LP Wii.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ndrew222 before reusing the design.