Skip to the content
2 layers83.2 × 59.7 mmStarpex Peak PCB, the printed circuit board in 3D

PCB to add a Raspberry Pi Pico to a Starpex Peak Guitar. Meant to run Santroller on the Pico

Size
83.2 × 59.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
21
Pads
39
Tracks, vias
74, 0
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
23 Oct 2025
Updated
29 Oct 2026

Overview

Starpex Peak PCB is an open-source printed circuit board by ndrew222, from the ndrew222/Starpex-Peak-PCB repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 83.2 × 59.7 mm with 5 parts on 21 nets, routed with 74 tracks and 0 vias.

Its parts include 3 switches and 2 connectors.

Parts

5
QtyValueFootprintReferences
2SW_PushPCM_Switch_Keyboard_Alps_Matias:SW_Alps_MatiasSW2, SW3
1Conn_01x12_PinCustom Footprints:GHJ1
1Conn_01x20_PinConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ2
1SW_SPDT_321Custom Footprints:KW11SW1

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Starpex Peak PCB PCB?

It measures 83.2 × 59.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starpex Peak PCB use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starpex Peak PCB KiCad files?

From the ndrew222/Starpex-Peak-PCB repository on GitHub, at the commit this page was made from: the board is Starpex Peak PCB.kicad_pcb and its schematic Starpex Peak PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starpex Peak PCB design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).