

A monorepo of circuit boards
- Size
- 62 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 34
- Pads
- 67
- Tracks, vias
- 164, 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Mar 2025
- Updated
- 20 Sep 2026
Overview
Timer2 is an open-source printed circuit board by ncku-formula-racing, from the ncku-formula-racing/circuit repository on GitHub. It is a 2-layer board of 62 × 60 mm with 17 parts on 34 nets, routed with 164 tracks and 9 vias.
It is built around the MAX7219M, AMS1117-5.0 and SS8050. Its parts include 5 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3MAX7219M
SOP-24-300mil10MHz 150uA 3-Wire Serial Interface 30mA 320mA 4V~5.5V 8 Segment x 8 Digit Built-in display RAM、PWM dimming、BCD input latch function、Power-up display blanking、Lamp test function、Cascadable function SOP-24-300mil Digital Tube Drivers ROHSHGSEMIDigital Tube DriversAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 1kΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | MAX7219 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Sensor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J1 |
More from ncku-formula-racing/circuit
12- 4 layers116 × 60 mm

- 2 layers95 × 50 mm

- 2 layers100 × 56 mm

- 2 layers70 × 50 mm

- 2 layers195 × 120 mm

- 2 layers60 × 55 mm

- 2 layers100 × 42 mm

- 2 layers94.9 × 73 mm

- 2 layers65 × 45 mm

- 2 layers71.8 × 60 mm

- 2 layers70 × 45 mm

- 2 layers57 × 47.5 mm

Similar boards
- 2 layers100 × 100 mm

Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT - 4 layers136.4 × 77.8 mm

Mother
emiirkaya/ThermovitalSync-PCB
A PCB project for a vital monitoring-cooling device with GUI
99 parts2MIT - 2 layers68.2 × 52.2 mm

Forward Ignition PCB
aditgoyal5/Forward_Ignition_PCB
This repository is about a printed circuit board I built for Team Sammard.
135 parts - 4 layers70.4 × 107.2 mm

- 2 layers153.6 × 50 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 2 layers482.6 × 35.6 mm

- 2 layers85.6 × 41 mm

Hl alyx glove
StarGate01/hl-alyx-glove
Firmware and Hardware for a Half-Life: Alyx Gravity Glove Replica
38 parts21MIT
Questions
How big is the Timer2 PCB?
It measures 62 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Timer2 use?
17 parts, built around the MAX7219M, AMS1117-5.0 and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Timer2 KiCad files?
From the ncku-formula-racing/circuit repository on GitHub, at the commit this page was made from: the board is timer2/Timer2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Timer2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ncku-formula-racing before reusing the design.