
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
This project is to create a PCB which connects the MakeBlock Ranger to an Adafruit ATtiny1616 breakout which connects to an IR line sensor. The PCB will be used to feed the line sensor data to the Ranger.
Attiny1616 linetracker is an open-source printed circuit board by nbourre, from the nbourre/makeblock_attiny1616_linetracker repository on GitHub. It is a 2-layer board of 72.6 × 48.8 mm with 16 parts on 21 nets, routed with 141 tracks and 13 vias.
Its parts include 7 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This project is to create a PCB which connects the MakeBlock Ranger to an Adafruit ATtiny1616 breakout which connects to an IR line sensor. The PCB will be used to feed the line sensor data to the Ranger.
![]()
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MH | MountingHole:MountingHole_4.3mm_M4_Pad_TopBottom_MakeBlock | H1, H2, H3, H4, H5, H6 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_GVSCLSDC | J6, J7 |
| 2 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | M7, M8 |
| 1 | ATtiny_L | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | ATtiny_R | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Auriga_JST | Connector_JST:JST_XH_S6B-XH-A-1_1x06_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | D_Schottky | PCM_Diode_SMD_AKL:D_SOD-123 | D1 |
| 1 | IR_TRACKER | Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 72.6 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nbourre/makeblock_attiny1616_linetracker repository on GitHub, at the commit this page was made from: the board is attiny1616_linetracker.kicad_pcb and its schematic attiny1616_linetracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nbourre before reusing the design.