Skip to the content
2 layers60 × 60 mmIntercom, the printed circuit board in 3D
Size
60 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
29
Pads
113
Tracks, vias
196, 57
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jun 2025
Updated
23 Jun 2025

Overview

Intercom is an open-source printed circuit board by navjeet-lohan, from the navjeet-lohan/Intercom-PCB repository on GitHub. It is a 2-layer board of 60 × 60 mm with 49 parts on 29 nets, routed with 196 tracks and 57 vias.

It is built around the MMBT9013, 100UF/16V and MMBT9014C, with the S8050 among its other parts. Its parts include 10 capacitors, 10 resistors, 8 diodes, 6 connectors and 4 transistors.

Main components

4

Parts

49
QtyValueFootprintReferences
5M7Diode_SMD:D_SMAD1, D2, D3, D5, D6
41KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R6, R7, R9
4FiducialFiducial:Fiducial_0.75mm_Mask1.5mmFID1, FID2, FID3, FID4
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
3Conn_01x02_PinConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ1, J1-CALL-S/W1, J3
20RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR15, R22
210KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R8
210uF/16VCapacitor_SMD:CP_Elec_3x5.4C4, C5
2Conn_01x03_PinConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalCN1, CN4
2MMBT9013Package_TO_SOT_SMD:SOT-23Q1, Q3
11000uF/16VCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC8
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11
1100u/16vCapacitor_SMD:CP_Elec_6.3x5.9C9
1100uF/16VCapacitor_SMD:CP_Elec_5x3.9C3
1470pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
1470uF/16VCapacitor_SMD:CP_Elec_6.3x7.7C1
16.2nFCapacitor_SMD:C_0603_1608MetricC6
1680pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10
16V8Diode_SMD:D_MicroMELF_HandsolderingD4
175RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
1Conn_01x05_PinConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ6
1MMBT9014Package_TO_SOT_SMD:SOT-23Q2
1NMDiode_SMD:D_SMAD8
1S8050Package_TO_SOT_THT:TO-92_InlineQ4
1SL5819/SOD-123Diode_SMD:D_SC-80_HandSolderingD7
1SW_Push_DPDTButton_Switch_THT:SW_NKK_G1xJPSW2
1SW_Push_SPDTButton_Switch_THT:SW_CK_JS202011AQN_DPDT_AngledSW1
1SXD054BPackage_SO:SOIC-8_5.3x6.2mm_P1.27mmU1

Similar boards

  • 2 layers37 × 23 mmSalt replacement, the printed circuit board in 3D

    Salt replacement

    qbancoffee/coco_salt_replacement

    This board replaces the functionality of the SALT chip in the CoCo (CoCo 2 in my case). The SALT chip (Supply and Level Translator) is responsible for supply regulation, RS-232 interface, level translation, cassette…

    20 parts11GPL-3.0
  • 2 layers94 × 84 mmLtm main, the printed circuit board in 3D

    Ltm main

    Mervs111/Line-Follower-Racer

    Board kecil yang ditumpuk di atas PCB utama (konsep v17, 03/11/2026): OLED 0,96 inci di socket di tengah, 5 tombol 6×6 mengapit untuk menu OLED (kiri: atas, bawah; kanan: kembali, OK, lanjut).

    25 parts
  • 2 layers97.1 × 97 mmADX, the printed circuit board in 3D

    ADX

    WB2CBA/ADX

    ADX - Arduino Digital Modes HF Transceiver

    82 parts136
  • 2 layers97 × 97 mmQO100 RX, the printed circuit board in 3D

    QO100 RX

    barisdinc/N3B_SDR_Transceiver_HW

    V/U/SHF and QO-100 SDR Transceiver Project

    167 parts20GPL-3.0
  • 2 layers98.5 × 50 mmController, the printed circuit board in 3D

    Controller

    terjeio/PCBLaserMkII

    Mechanical and electrical design files for revised version of my PCB Laser exposer

    37 parts18
  • 2 layers97.1 × 97 mmPDX, the printed circuit board in 3D

    PDX

    kholia/Easy-Transceiver

    Easy Digital 'FT8' Transceiver. Easy-Transceiver v0.01.

    90 parts15
  • 2 layers178 × 129.5 mmRgb board, the printed circuit board in 3D

    Rgb board

    skumlos/if-c01comg-clone-tht-full

    A full sized SCART/BNC version of the IF-C01COMG clone base board

    89 parts15WTFPL
  • 2 layers99.6 × 84.7 mmAmplified WSPR Beacon v4, the printed circuit board in 3D

    Amplified WSPR Beacon v4

    kholia/Easy-Beacons-STEM

    Easy-Beacons project adapted for STEM education. Powered by Raspberry Pi Pico (W) boards. WSPR + FT8 beacons for science (TM).

    54 parts13

Questions

How big is the Intercom PCB?

It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Intercom use?

49 parts, built around the MMBT9013, 100UF/16V, MMBT9014C and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Intercom KiCad files?

From the navjeet-lohan/Intercom-PCB repository on GitHub, at the commit this page was made from: the board is Intercom 21-3-2025/Intercom.kicad_pcb and its schematic Intercom 21-3-2025/Intercom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Intercom design in my own project?

Its repository states no licence, so its author keeps all rights: ask navjeet-lohan before reusing the design.