
Pcb chip
nwaltz/buzzies
bilateral stimulation tappers for use as a EMDR therapy device through Engineers Without Borders OSU

ClassA amp is an open-source printed circuit board by NAVEENKCG, from the NAVEENKCG/ClassA_Amp_PCB repository on GitHub. It is a 2-layer board of 37 × 26 mm with 12 parts on 12 nets, routed with 30 tracks and 0 vias.
It is built around the TIP41A and TIP42A. Its parts include 5 resistors, 3 transistors, 2 capacitors and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | C | Capacitor_THT:C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal | C1, C2 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | TIP41A | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | TIP42A | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |

nwaltz/buzzies
bilateral stimulation tappers for use as a EMDR therapy device through Engineers Without Borders OSU

Hirusha785/400W-Class-D-Audio-Amplifier
🎵 400W Class-D Audio Amplifier designed around the IRS2092S high-performance Class-D controller, featuring a ±55V power stage, discrete MOSFET switching section, LC output filter, protection circuitry, and a custom…

pranav-khetarpal/Buzzies-new
This is the repository to hold Buzzies code and other files.

X-ANONYMOUS-POWER-AMPLIFIER/X-B120W-4-LITE
SIMPLE MAIN-CIRCUIT MODULE OF 120 WATTS CLASS-B AUDIO POWER AMPLIFIER MAIN-CIRCUIT FOR 4-OHMS OUTPUT LOAD

MadsRudolph/62768-energy-system
Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
It measures 37 × 26 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the TIP41A and TIP42A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NAVEENKCG/ClassA_Amp_PCB repository on GitHub, at the commit this page was made from: the board is ClassA_amp.kicad_pcb and its schematic ClassA_amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NAVEENKCG before reusing the design.