

Scale heli leds
Control the leds on a scale aircraft
- Size
- 28.2 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 18
- Pads
- 71
- Tracks, vias
- 206, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 May 2018
- Updated
- 13 Nov 2018
Overview
Scale heli leds is an open-source printed circuit board by nautilus-nico, from the nautilus-nico/HeliLeds repository on GitHub. It is a 2-layer board of 28.2 × 16 mm with 17 parts on 18 nets, routed with 206 tracks and 41 vias.
It is built around the CL320SG-G, USBLC6-2P6 and BAT54C. Its parts include 4 capacitors, 4 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3CL320SG-G
SOIC-8-EP-40℃~+150℃ 0Hz~100kHz 20mA 3 4V~90V 6% 6.5V~90V PWM SOIC-8-EP LED Drivers ROHSMicrochip TechnologyLED DriversUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdHeliLeds
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C2, C4 |
| 2 | 10uF | Capacitors_SMD:C_0603_HandSoldering | C1, C3 |
| 2 | 68R | Resistors_SMD:R_0603_HandSoldering | R3, R4 |
| 1 | 1k | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | 1k5 | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | ATTINY85-S | pkl_housings_soic:SOIC-8_5.3x5.3mm_Pitch1.27mm | IC1 |
| 1 | BAT54C | digikey-footprints:SOT-23-3 | D1 |
| 1 | CL320SG-G | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | CONN_XH_4POS | pkl_pin_headers:Pin_Header_Angled_1x04 | J1 |
| 1 | HEADER_4POS_2.50mm | pkl_pin_headers:Pin_Header_Straight_1x04 | J2 |
| 1 | MIC5225-3.3V | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | PWR LED | LEDs:LED_0603_HandSoldering | D2 |
| 1 | USBLC6-2 | TO_SOT_Packages_SMD:SOT-666 | U1 |
| 1 | pkl_USB_OTG | pkl_connectors:Connector_USB_Micro_B_SMD | P1 |
Similar boards
- 4 layers

- 2 layers25.7 × 67.6 mm

- 6 layers50 × 50 mm

- 4 layers166.1 × 91.4 mm

Venturi MainPCB
David207025/Venturi
Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module
114 parts - 4 layers85 × 100 mm

- 6 layers26 × 56.8 mm

Bluebuzz rm2
sequoia-hope/bluebuzz
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can…
109 parts - 4 layers71.4 × 80.3 mm

Ex2
zaidhajji/Custom-Flight-Controller-Design-STM32F407-KiCad
Designed a custom flight controller board from schematic to layout: STM32F407VGTx MCU, MPU6050 IMU, BMP280 barometer, MicroSD logging, 6 servo/ESC outputs, and dual-stage power regulation.
93 parts - 4 layers50.8 × 20.3 mm

Questions
How big is the Scale heli leds PCB?
It measures 28.2 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scale heli leds use?
17 parts, built around the CL320SG-G, USBLC6-2P6 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scale heli leds KiCad files?
From the nautilus-nico/HeliLeds repository on GitHub, at the commit this page was made from: the board is scale_heli_leds.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scale heli leds design in my own project?
Its repository states no licence, so its author keeps all rights: ask nautilus-nico before reusing the design.