

- Size
- 20 × 12.5 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 38
- Nets
- 39
- Pads
- 97
- Tracks, vias
- 33, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2025
- Updated
- 10 Jun 2025
Overview
ECG is an open-source printed circuit board by nathanos01, from the nathanos01/BME_Projekt_PCB repository on GitHub. It is a 4-layer board of 20 × 12.5 mm with 38 parts on 39 nets, routed with 33 tracks and 11 vias.
It is built around the ADPD7000BCBZR7, LP5910-1.8YKAR and DMP2045UQ-7. Its parts include 12 capacitors, 12 connectors, 4 resistors, 2 ICs and 1 diode.
Main components
3ADPD7000BCBZR7
WLCSP-36(2.6x2.8)-40℃~+85℃ 0.3uA 2.7V~3.6V 9000Hz 9000Hz 90dB 960kHz、1MHz Multiplexers、Simultaneous sampling control SPI WLCSP-36(2.6x2.8) Analog Front End (AFE) ROHSAnalog DevicesAnalog Front End (AFE)LP5910-1.8YKAR
DSBGA-4DSBGA-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorisedDMP2045UQ-7
SOT-23-3-55℃~+150℃ 1 P-Channel 1.2W 1V 20V 4.3A 45mΩ@4.5V 6.8nC 634pF 66pF 81pF SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdBME_Projekt_PCB
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x01_Pin | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 4 | 0.47u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10, C11, C12 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C5, C6 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C7, C8 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 50k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 300k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | ADPD7000BCBZR7 | ADPD7000:CB-36-11_ADI | U1 |
| 1 | DMP2045UQ-7 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | D_Zener | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | Fuse | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | LP5910-1.8YKAR | footprints:YKA0004ACAC | U2 |
| 1 | Varistor | Varistor:VC | RV1 |
More from nathanos01/BME_Projekt_PCB
1- 2 layers

Similar boards
- 2 layers35.4 × 70.6 mm

PCB ESP32
maticas-tech-sas/maticas-data-logger
Want to send measurements back to a server through HTTP or MQTT? This is about it along with the PCB design, 3D box and support for data storage with maticas API
45 parts1 - 2 layers101.1 × 60.5 mm

DATALOGGER02
mlab-modules/DATALOGGER02
Arduino based data logger with LoRa IoT interface.
161 partsGPL-3.0 - 4 layers135 × 86.8 mm

Line following robot board
Pavich-3/line-following-robot-board
Line-following robot board in KiCad PCB (STM32F0)
73 parts - 4 layers53 × 39.5 mm

- 4 layers68.8 × 53.6 mm

Easyduino Atmega
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
38 parts755CERN-OHL-P-2.0 - 4 layers76.7 × 65.7 mm

FloatV2
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
38 parts192MIT - 4 layers38 × 38 mm

- 4 layers53.2 × 53.2 mm

Smart lcc
magnusnordlander/smart-lcc
A smarter LCC for the Lelit Bianca V2, with Wi-Fi and stuff.
38 parts54
Questions
How big is the ECG PCB?
It measures 20 × 12.5 mm and has 4 copper layers, 1 mm thick.
What parts does the ECG use?
38 parts, built around the ADPD7000BCBZR7, LP5910-1.8YKAR and DMP2045UQ-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ECG KiCad files?
From the nathanos01/BME_Projekt_PCB repository on GitHub, at the commit this page was made from: the board is PCB/ECG/ECG.kicad_pcb and its schematic PCB/ECG/ECG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ECG design in my own project?
Its repository states no licence, so its author keeps all rights: ask nathanos01 before reusing the design.