2 layers65 × 62 mm
2 layers
Together
nathab32/TogetherTogether is a device for maintaining connections with friends and companions. Together is heavily inspired by Tamagotchi devices, but differs in that it is collaborative.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 66
- Pads
- 99
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 May 2026
- Updated
- 1 Oct 2026
Overview
Together is an open-source printed circuit board by nathab32, from the nathab32/Together repository on GitHub. It is a 2-layer board with 4 parts on 66 nets.
It is built around the ESP32-WROOM-32E, INMP441 and PEC11R-4220F-S0024. Its parts include 2 ICs and 1 switch. It belongs with the ESP32 boards of this library.
Main components
3README
README.mdTogether
About
Together is a device for maintaining connections with friends and companions. Together is heavily inspired by Tamagotchi devices, but differs in that it is collaborative. Born from a graduating senior in need of grad gift ideas, Together hopes to allow friends to stay connected even after they are physically separated.
Planned Features
- Record voice notes for friends or personal use
- Playback voice notes with integrated speaker
- Start streaks with your friends
- Addressible RGBs to see status of friends/do whatever you want
- Complete tasks with your companions to grow pets!
- Use as microphone for computer/phone or bluetooth speaker
- Tuner
- Metronome
ESP32-D0WD-V3
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | INMP441 | EasyEDA:MIC-SMD_INMP441 | MIC1 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 1 | PEC11R-4220F-S0024 | EasyEDA:SW-TH_5P-L12.5-W13.4-P2.50-LS14.5-EH13.2 | SW1 |
Similar boards
- 2 layers100 × 100 mm
- 2 layers70 × 110 mm
Nucleo144 DSP
mnemocron/Nucleo-DSP-Shield
Audio DSP Shield for STM32 Nucleo-144 Boards (H723zg) based on the TLV320 CODEC
70 parts2GPL-3.0 - 2 layers79.4 × 66.1 mm
Macropad
axooexe/Macropad-s-PCB
This repository contains the schematics and PCB layout files for a custom 8switches and an encoder macropad.
19 parts1 - 4 layers47 × 106 mm
- 2 layers85 × 120 mm
Home Assistant Control pad
Pegoku/Home-Assistant-Control-pad
This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).
111 parts1GPL-3.0 - 4 layers92.8 × 76 mm
Deck-8
varaddorle007/deck-8
Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware
101 parts1MIT - 4 layers150 × 100 mm
Interrupter v1.2
Alberto0235/DRSSTC-Fiber-Optic-Interrupter
Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO).
212 partsMIT
Questions
What parts does the Together use?
4 parts, built around the ESP32-WROOM-32E, INMP441 and PEC11R-4220F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Together KiCad files?
From the nathab32/Together repository on GitHub, at the commit this page was made from: the board is KiCad/Together.kicad_pcb and its schematic KiCad/Together.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Together design in my own project?
Its repository states no licence, so its author keeps all rights: ask nathab32 before reusing the design.